Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-5154

2 GS/s Digitizer/Oscilloscope, Optimized for Automated Test

Configure Page for: Print PDF Rich Text
  • 1 GHz bandwidth
  • 2 GS/s maximum real-time sampling, up to 20 GS/s equivalent-time sampling
  • 2 simultaneously sampled channels
  • Deep onboard memory: 8 MB/ch standard, up to 256 MB/ch
  • 100 mV to 5 V input ranges
  • 50 Ω input impedance
Compare to similar products
Data Sheet

The NI PCI-5154 high-speed digitizer features 1 GHz analog bandwidth and an up to 2 GS/s real-time sample rate (20 GS/s equivalent-time sample rate for repetitive signals), making it ideal for acquisition and characterization of fast, nanosecond-edge speeds. The digitizer also comes equipped with up to 256 MB of memory per channel to provide high sustained sample rates over extended data capture windows.

The PCI-5154 is well-suited for automated test and data streaming applications in the consumer electronics, semiconductor, aerospace/defense, and life sciences industries.

A digitizer optimized for automated test leverages a high-throughput bus to lower test times, provides picosecond-level synchronization among modules, and integrates with the entire suite of NI hardware - including arbitrary waveform generators, high-speed digital I/O, and other digitizers - so you can build and customize a complete mixed-signal or high-channel-count test system with up to 34 phase synchronous 1 GS/s channels in a single PXI chassis.

Data Sheet | View Pricing and Purchasing Information »

Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
  NI PCI-5154      
780320-03 256 MB/ch 12 - 20 $ 13,999
780320-01 8 MB/ch 12 - 20 $ 8,999
780320-02 64 MB/ch
NI Recommended		 12 - 20 $ 10,499

Each NI PCI-5154 - 64 MB/ch requires: 1 Cable

NI PCI-5154 - 64 MB/ch Cable
Step 2: Select Cable
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
778827-01 SMB 112
NI Recommended		 10 - 15 $ 89
763389-01 SMB 100 5 - 10 $ 59
778415-01 SMB 100 (8 pack) 5 - 10 $ 339
188859-01 SMB 200 Cable, SMB Plug to SMB Plug Coax, 50 Ohm, (1m) 10 - 15 $ 59
763388-01 SMB 300 5 - 10 $ 59
Step 3: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Family Digitizers/Oscilloscopes
Form Factor PCI
Operating System/Target Windows , Real-Time
LabVIEW RT Support Yes
Triggering Analog , Digital
Synchronization Bus (RTSI) Yes
External Clocking Yes
Length 32.200 cm
Width 2.0 cm
Height 11.300 cm
I/O Connector BNC connectors , SMB male
Product Name PCI-5154
Analog Input
Channels 2
Resolution 8.0 bits
Simultaneous Sampling Yes
Sample Rate 2 GS/s
Random Interleaved Sampling (RIS) Rate 20000000000.000 S/s
Bandwidth 1000.0 MHz
Maximum Common Mode Voltage 10.0 V
On-Board Memory 256 MB
Frequency Range 1.0 , 0.0 MHz
Max Voltage 2.500 , -2.500 V
Maximum Voltage Range Sensitivity 19.600 mV
Minimum Voltage Range 50.0 , -50.0 V
Minimum Voltage Range Sensitivity 390 µV
Supports Alias Protected Decimation? No
Provides Digital Down Conversion? No
Analog Output
Channels 0
Digital I/O
Channels 0

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »


Interested in OEM Discounts?

By providing competitive quantity discount pricing, high quality hardware and driver software, and top-notch application support, National Instruments is an award-winning, leading worldwide OEM supplier of digitizers and other measurement products. NI recognizes that OEM needs are different from end user needs. OEMs need cost-effective, high-quality, stable products and experienced support to help get their products to market quickly and keep them competitive.

National Instruments wants to be your OEM supplier. For more information about how NI can increase your quality and decrease your cost, give John a call.

John Hottenroth
Digitizer OEM Manager

Available for any OEM related questions and assistance
Call John at (866) 399-2117

E-mail John at John.Hottenroth@ni.com

View Pricing and Purchasing Information »

Back to top »