Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-5152

2 GS/s Digitizer/Oscilloscope, Optimized for Automated Test

Configure Page for: Print PDF Rich Text
  • 300 MHz bandwidth
  • 2 GS/s maximum real-time, up to 20 GS/s equivalent-time sampling
  • 2 simultaneously sampled channels
  • Deep onboard memory - 8 MB/ch standard, up to 256 MB/ch
  • 100 mV to 10 V input ranges
  • 50 Ω and 1 MΩ input impedance
View Data Sheet


The NI PCI-5152 high-speed digitizer features 300 MHz analog bandwidth and up to 2 GS/s real-time sample rate (20 GS/s equivalent-time sample rate for repetitive signals), making it ideal for acquisition and characterization of fast, nanosecond-edge speeds. The digitizer also comes equipped with up to 256 MB of memory per channel to provide high sustained sample rates over extended data capture windows.

The PCI-5152 is well-suited for automated test and data streaming applications in the consumer electronics, semiconductor, aerospace/defense, and life sciences industries.

A digitizer optimized for automated test uses a high-throughput bus to lower test times, provides picosecond-level synchronization among modules, and integrates with the entire suite of NI hardware - including arbitrary waveform generators, high-speed digital I/O, and other digitizers – so you can build and customize a complete mixed-signal or high-channel-count test system, up to 34 phase synchronous 1 GS/s channels in a single PXI chassis.

View Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

View Data Sheet

Specifications Summary

General
Product Family Digitizers/Oscilloscopes
Form Factor PCI
Part Number 779945-01 , 779945-03 , 779945-02
Operating System/Target Real-Time , Windows
LabVIEW RT Support Yes
Triggering Digital , Analog
Synchronization Bus (RTSI) Yes
External Clocking Yes
Length 32.2 cm
Width 2 cm
Height 11.3 cm
I/O Connector SMB male , BNC connectors
Product Name PCI-5152
Analog Input
Channels 2
Resolution 8 bits
Simultaneous Sampling Yes
Sample Rate 2 GS/s
Random Interleaved Sampling (RIS) Rate 20 GS/s
Bandwidth 300 MHz
Input Impedance 50 Ohm , 1 MOhm
Maximum Common Mode Voltage 10 V
On-Board Memory 256 MB
Frequency Range 0 Hz - 300 MHz
Max Voltage -5 V - 5 V
Minimum Voltage Range -50 mV - 50 mV
Minimum Voltage Range Sensitivity 390 µV
Supports Alias Protected Decimation? No
Provides Digital Down Conversion? No
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0

NI PCI-5152 Complete Package

Each NI PCI-5152 requires:
1 Cable NI PCI-5152 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-5152 and Accessories

Hardware Subtotal: $ 7,665
NI PCI-5152
779945-02 Qty $ 7,570 each
779945-01 Qty $ 5,870 each
779945-03 Qty $ 10,660 each
Required Accessories
Cable - Unshielded
Qty $ 95 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show
Estimated Shipping Days: 12 - 20
Package Price: $ 7,665
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
You need a cable to transmit signals to your device.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »