NI PXI-10563U/6U Dual-Stack Chassis for PXI |
Data Sheet |
Configure System 
The National Instruments PXI-1056 is a 3U/6U dual-stack chassis that accommodates combinations of 6U and 3U modules. The NI PXI-1056 accepts all NI PXI embedded controllers, including Pentium M and Pentium 4 embedded controllers that run Windows or LabVIEW Real-Time OSs. The chassis is designed for applications where custom 6U modules or high-end RF modules, available in the 6U format, need to be used in a single system with 3U modules commercially available from multiple vendors. More than 1,150 PXI/CompactPCI products are available in the 3U PXI format, so you have a large selection of 3U modules to add functionality to the 6U modules you use in this chassis.The PXI-1056 chassis is a low-profile chassis with a 4U height that easily fits in a 19 in. rack. Although the PXI-1056 can theoretically accept up to seventeen 3U modules (14 dual-stacked and three above the controller), NI recommends the NI PXI-1045 18-slot chassis for a system using seventeen 3U modules. You have selected the United States as the country where you will use the product(s) (change). Additional Product Information
System Assurance ProgramsReduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended WarrantiesNational Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
For more information about your warranty options:
CalibrationNI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products. TrainingNI training is the fastest, most certain route to productivity with NI tools and successful application development. Repair ServicesReturn your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support |
