The NI ECU Measurement and Calibration Toolkit extends the NI LabVIEW, NI LabWindows™/CVI, and Microsoft C/C++ development environments to support measurement and calibration applications for the design and validation of electronic control units (ECUs). The ECU Measurement and Calibration Toolkit provides high-level, easy-to-use functions based on the Universal Measurement and Calibration Protocol (XCP) and CAN Calibration Protocol (CCP). Because of these protocols, you can read and write to internal ECU variables and characteristics as defined in ASAM (.A2L) database files. By using (.A2L) database files, the toolkit automatically applies all scaling information and returns data in engineering units for easy analysis, presentation, and logging. In addition, the toolkit offers high-quality examples for typical use case applications such as how to measure ECU variables or how to manipulate ECU characteristics using 1D to 3D user interfaces.
The NI ECU Measurement and Calibration Toolkit allows you to develop a single application and deploy as often as you like without additional deployment or run-time licensing. However, a full development license is required if wanting to use the XCP and CCP Master add-on for NI VeriStand.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
