Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-5441

Arbitrary Waveform Generator with Onboard Signal Processing

Print Configure page for PDF
  • 16-bit resolution, 100 MS/s sampling rate
  • 400 MS/s effective sampling rate with DAC interpolation
  • 32, 256, or 512 MB of onboard memory
  • Carrier frequencies up to 43 MHz with 355 nHz resolution
  • Quadrature digital upconversion
  • Continuous data streaming up to 100 MB/s
  • FIR and CIC interpolation filters
  • Multimodule synchronizationwith <20 psrms skew
  • Data Sheet  |   Configure System popup

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
  NI PXI-5441      
779058-02 32 MB -- For price, select country  
779058-03 256 MB
NI Recommended		 -- For price, select country  
779058-04 512 MB -- For price, select country  

Each NI PXI-5441/256MB requires: 1 Cable

NI PXI-5441/256MB Cable
Step 2: Select Cable
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
778827-01 SMB 112
NI Recommended		 -- For price, select country  
188859-01 SMB 200 -- For price, select country  
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Software
778848-01 NI Analog Waveform Editor -- For price, select country  
Step 4: Add to Cart or Get a Quote

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

The National Instruments PXI-5441 is a 100 MS/s arbitrarywaveform generator with onboard signal processing (OSP). OSPfunctions include FIR and CIC interpolation filters, digital per-filtergain and offset control, a numerically controlled oscillator (NCO),and IQ mixing for quadrature digital upconversion. With 16-bitresolution and -91 dBc close-in spurious-free dynamic range (SFDR),the NI PXI-5441 brings instrument quality specifications to applicationsrequiring digital upconversion and baseband interpolation such asprototyping, validating, and testing communications, radar, andelectronic warfare systems. Because the PXI-5441 is a full-featuredarbitrary waveform generator, it is also capable of generating general-purpose electrical test signals and has a maximum output range of12 Vpp into a 50 Ω load.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents


Specifications Summary

General 
Form FactorPXI
OS SupportWindows, Real-Time, Linux
LabVIEW RT SupportYes
Analog Input 
Number of Channels0
Analog Output 
Number of Channels1
TimingHardware
Update Rate100 MS/s
Frequency Range0..43 MHz
Resolution16 bits
Output Impedance50 Ohm, 75 Ohm
Maximum On-Board Memory 512 MB
Maximum Voltage Range-6..6 V
      Range Sensitivity48 mV
Minimum Voltage Range-2.82..2.82 mV
      Range Sensitivity1 mV
Waveform TypesStandard Functions, Intermediate Frequency, Arbitrary, Video, DC
Provides Data Bit Marker?Yes
Supports Linking/Looping Segments?Yes
Supports Frequency Hopping and Sweeping?Yes
Supports Data Streaming?Yes
Supports On-the-fly signal adjustments?Yes
Dynamic Range -78 dBFS
Noise Floor (@ -50 dBm output)-148 dBm/Hz
Digital I/O 
Number of Channels0
Timing/Triggering/Synchronization 
Synchronization Bus (RTSI)Yes
T-clock CapabilityYes
TriggeringDigital
External ClockingYes
Physical Specifications 
Length16 cm
Width10 cm
Height2 cm
I/O ConnectorSMB male

View Pricing and Purchasing Information »

Factory Installation

Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:

  • Installation of all individual hardware and software components as well as full testing to eliminate conflicts
  • Custom documentation plus a custom restore and startup utility
  • 2-year warranty and calibration coverage

This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

  • You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
  • Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
  • View your RMA support request status online
  • Register your product

Technical Support

www.ni.com/support

View Pricing and Purchasing Information »

Back to top »