Measurement Tool For NI VirtualBench by 10X Engineering Amplitude-/Phase-Frequency Response, Gain Measurements
| Starting at | $ 290 | (view pricing options) |
- Functional application based on NI VirtualBench (VB-8012, VB-8034) hardware
- Multiple measurements from a single, user-friendly interface
- User-configurable parameters: signal levels, frequency range, DUT power supply, etc.
- Fast and easy data analysis, report generation capability
- Two-language user interface: English and Russian
- Report generation
- Download
The Measurement Tool For NI VirtualBench by 10X Engineering is special software designed to measure the characteristics of the radio electronic components, units, and blocks based on NI VirtualBench equipment (to avoid the damage of equipment, use current software only with specified models: VB-8012, VB-8034).
The program allows the user to control the levels of input/output signals and frequencies, analyze the obtained results, and export the data in the form of a report.
The program enables the measurement of the following parameters of the device under test (DUT):
-Amplitude-frequency response
-Phase-frequency response
-Gain
Support Information
This product is supported by the third-party provider and not by NI. For more information, contact 10X Engineering at:
Website: http://10x.am/?lang=eng
Email: info@10x.am
Disclaimer: This example package (this "program") was developed by a National Instruments ("NI") Engineer. Although provided by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE.
The program allows the user to control the levels of input/output signals and frequencies, analyze the obtained results, and export the data in the form of a report.
The program enables the measurement of the following parameters of the device under test (DUT):
-Amplitude-frequency response
-Phase-frequency response
-Gain
Support Information
This product is supported by the third-party provider and not by NI. For more information, contact 10X Engineering at:
Website: http://10x.am/?lang=eng
Email: info@10x.am
Disclaimer: This example package (this "program") was developed by a National Instruments ("NI") Engineer. Although provided by National Instruments, this program may not be completely tested and verified, and NI does not guarantee its quality in any way or that NI will continue to support this program with each new revision of related products and drivers. THIS PROGRAM IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND AND SUBJECT TO CERTAIN RESTRICTIONS AS MORE SPECIFICALLY SET FORTH IN NI.COM'S TERMS OF USE.
|
Guarantee your price for 30 days (learn more) |
|
|
|