DVB-T2 Digital Video Signal Generation Toolkit - MaxEye Technologies Create DVB-T2 Standard Test Signals
- DVB-T2 Mode A: Single PLP, Version 1.1.1
- Carrier Mode: Normal and Extended; PAPR: Tone reservation-based PAPR reduction
- BW: 1.7 MHz, 5 MHz, 6 MHz, 7 MHz, 8 MHz, and 10 MHz; FFT Size: 1K, 2K, 4K, 8K, 16K, and 32K
- FEC: BCH+LDPC 1/2, 3/5, 2/3, 3/4, 4/5, and 5/6; OFDM cosine windowing; AWGN and I/Q impairments
- Payload configuration: MPEG TS files, PN sequence, test pattern, user-defined bits
- LabVIEW API VIs, programming examples, real-time streaming using NI RFSG
- Download
MaxEye signal generation software is an ideal test tool for generating test signals with different configurations and conditions to completely test the receiver during design, verification, and manufacturing and characterize the receiver performance. You can verify the receiver performance by implementing BER analysis at the various stages of the receiver (BER after demodulation, BER after inner decoding, and BER after outer decoding).
The MaxEye Technologies DVB-T2 Digital Video Signal Generation Toolkit offers a standards-based test solution for designing, evaluating, and manufacturing Digital Video Broadcasting-Second Generation Terrestrial (DVB-T2) equipment. This system transmits compressed digital audio, video, and other data in physical layer pipes (PLPs) using orthogonal frequency division multiplexing (OFDM) modulation with concatenated channel coding and modulation. The toolkit supports ETSI EN 302 755 V1.1.1 (2009-09), “Digital Video Broadcasting (DVB); Frame structure, channel coding, and modulation for a second-generation digital terrestrial television broadcasting system (DVB-T2).” This version of the toolkit supports Mode-A (Single PLP).
Support Information
For technical support, contact MaxEye Technologies at:
Phone: +91-80-2527-0024, +91-94-4806-7717
Email: info@maxeyetech.com, ramesh@maxeyetech.com
Web: maxeyetech.com
Disclaimer: The Third-Party Add-Ons for LabVIEW on this page are offered by independent third-party providers who are solely responsible for such products. NI shall have no responsibility whatsoever for the performance of the Third-Party Add-Ons. The sale of these Third-Party Add-Ons is subject to the Terms and Conditions of Sale of the third-party provider.
The MaxEye Technologies DVB-T2 Digital Video Signal Generation Toolkit offers a standards-based test solution for designing, evaluating, and manufacturing Digital Video Broadcasting-Second Generation Terrestrial (DVB-T2) equipment. This system transmits compressed digital audio, video, and other data in physical layer pipes (PLPs) using orthogonal frequency division multiplexing (OFDM) modulation with concatenated channel coding and modulation. The toolkit supports ETSI EN 302 755 V1.1.1 (2009-09), “Digital Video Broadcasting (DVB); Frame structure, channel coding, and modulation for a second-generation digital terrestrial television broadcasting system (DVB-T2).” This version of the toolkit supports Mode-A (Single PLP).
Support Information
For technical support, contact MaxEye Technologies at:
Phone: +91-80-2527-0024, +91-94-4806-7717
Email: info@maxeyetech.com, ramesh@maxeyetech.com
Web: maxeyetech.com
Disclaimer: The Third-Party Add-Ons for LabVIEW on this page are offered by independent third-party providers who are solely responsible for such products. NI shall have no responsibility whatsoever for the performance of the Third-Party Add-Ons. The sale of these Third-Party Add-Ons is subject to the Terms and Conditions of Sale of the third-party provider.