-
The National Instruments SCXI-1167 is a 64-channel external relay driver, capable of providing up to 50 V or 600 mA of drive capacity (with an external supply...
-
The National Instruments SCXI-1359 kit includes the NI SCXI-1357 high-voltage 2-slot backplane adapter and cable that...DMMs, NI 4060 DMMs, or NI 4021 switch controllers to the SCXI-1127, SCXI-1128, SCXI-1129, SCXI-1130, SCXI-1166, SCXI-1167...
-
SCXI cable assemblies connect the I/O connector of a measurement device to the front-end signal conditioning SCXI system. For most applications, because SCXI operates in multiplexed mode, only one cable assembly is required to connect a multimodule SCXI system...
-
SCXI cable assemblies connect the I/O connector of a measurement device to the front-end signal conditioning SCXI system. For most applications, because SCXI operates in multiplexed mode, only one cable assembly is required to connect a multimodule SCXI system...
-
Use the "Configure System" link above to configure an SCXI DAQ system based on this module. The NI SCXI-1121 and SCXI-1122 modules are designed for a wide variety of sensor and signal inputs requiring isolation...
-
Use the "Configure System" link above to configure an SCXI DAQ system based on this module. National Instruments offers a variety of 32-channel analog input modules for SCXI, including the SCXI-1100, SCXI-1102 Series, and SCXI-1104 Series. The programmable...
-
The NI SCXI-1600 is a full-featured 16-bit USB DAQ and control module for SCXI analog input, analog output, digital I/O, and switching modules. The SCXI-1600 plugs into an SCXI chassis and provides data and control capabilities for all modules in...
-
The SCXI-1362 cable assembly interfaces the 9-pin round DIN connector of the NI 4021 switch controller and NI 4060 DMM to switching systems solely containing SCXI-1160, SCXI-1161, SCXI-1163R, SCXI-1190, and SCXI-1191 modules. SCXI-1127, SCXI-1128...
-
Use the "Configure System" link above to configure an SCXI DAQ system based on this module. The NI SCXI-1102 and SCXI-1112 are designed for high-accuracy thermocouple measurements. They share a common architecture...
-
Use the "Configure System" link above to configure an SCXI DAQ system based on this module. The NI SCXI-1126 has eight isolated frequency input channels. Each channel...programmable input range, threshold, hysteresis, and filtering. The SCXI-1126
