-
Using NI-SCOPE software, included with every purchase of an NI digitizer, you can develop powerful measurement solutions in minimal time. This easy-to-use software seamlessly integrates the full functionality of your digitizer hardware into NI LabVIEW, NI Measurement Studio, Visual Basic, and Visual
-
The NI PXI-5105 is a high-density digitizer with eight simultaneously sampled channels. It features a wide set of input ranges from 50 mV to 30 V, software-selectable 50 Ω or 1 MΩ input impedance, deep onboard memory up to 512 MB, a wide variety of triggering options, and tight synchronization
-
The NI PCI-5122 high-resolution digitizer is suited for a wide variety of applications in communications, scientific/medical research, military/aerospace, and consumer electronics. With the large dynamic range, software-selectable 50 Ω or 1 MΩ input, ranges from 200 mVpp to 20 Vpp, and ability to
-
The NI PXI-5122 high-resolution digitizer is suited for a wide variety of applications in automotive, communications, scientific research, military/aerospace, and consumer electronics. With the large dynamic range, software-selectable 50 Ω or 1 MΩ input, ranges from 200 mV to 20 V (up to 100 V with
-
The NI PXI-5124 high-resolution digitizer is suited for a wide variety of applications in automotive, communications, scientific research, military/aerospace, and consumer electronics. With the large dynamic range, software-selectable 50 Ω or 1 MΩ input, ranges from 200 mV to 20 V, and ability to
-
The NI PXI-5922 is a dual-channel flexible-resolution digitizer with the highest resolution and highest dynamic range of any digitizer on the market. It maximizes vertical resolution based on the selected sample rate, from 24 bits at rates up to 500 kS/s to 16 bits at 15 MS/s. This unparalleled
-
The NI USB-5133 eight-bit digitizer/oscilloscope features 100 MS/s sampling rates on two simultaneously sampled channels with 10 input ranges from 40 mVpp to 40 Vpp. The digitizer comes standard with 8 MB of onboard memory for extended data captures. The bus-powered, plug-and-play form factor of the
-
The NI PXIe-5122 high-resolution digitizer is a x4 PXI Express module that can stream data at the full data rate of 400 MB/s to the PC memory, hard disk, or RAID 0 array of disks. This digitizer is ideal for applications such as signal intelligence, radar, and IF/RF data streaming. With its broad
-
The NI PCI-5102 is a dual-channel 20 MS/s digitizer with a 15 MHz bandwidth. Using PCI-5102 deep-memory digital oscilloscopes, you can build lower-cost, faster-performance automated test systems. For new applications, NI recommends the new USB-5133 8-bit, 100 MS/s digitizer.
-
The NI PXI-5114 is a low-cost digitizer for high-speed applications. It features a wide set of input ranges from 40 mV to 40 V, software-selectable 50 Ω or 1 MΩ input impedance, deep onboard memory up to 256 MB/channel, tight synchronization capability, and a wide variety of triggering options
