cFP-2010
Drivers & Updates | VIEW ALL
KnowledgeBase | VIEW ALL
Tutorials | VIEW ALL
Example Code | VIEW ALL
Legal
By using this web site, you accept the Terms of Use for this web site. Please read the Terms of Use carefully before using any part of this site. Please go here for information on ni.com's copyright infringement policy.
Overview
- Embedded Web and file servers with remote-panel user interface
- Embedded controller runs LabVIEW Real-Time for control, signal processing, and distributed I/O
- 2 RS232 serial ports for connection to peripherals
- Supported by LabVIEW Real-Time Module 8.5.1 and previous versions
- 32 MB DRAM memory for advanced applications (typically 24 MB user accessible), 64 MB of nonvolatile
- For new designs, NI recommends using the cFP-2210
- Stand-alone embedded real-time controller or Ethernet interface for PC-based distributed I/O
- Information based on current version
Additional Resources
Data Sheet
Certification
National Instruments (NI) products comply with the applicable International requirements for product safety, electromagnetic compatibility (EMC), hazardous locations, marine, RoHS, and quality. Look for the marks on the product label for verification of certification.
Dimensional Drawings
Ask An Engineer
Submit your question, view possible solutions, and post to the Discussion Forums, email, or call NI. Please note, for phone and e-mail requests, a valid service contract is required.
Ask An Engineer