Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI DAQPad-6020E for USB

Legacy 100 kS/s, 12-Bit, 16 Analog Input Multifunction DAQ

Configure Page for: Print PDF Rich Text
  • Scheduled for obsolescence. For new designs NI recommends the NI USB-6251 or NI USB-6259
  • Two 12-bit analog outputs; 8 digital I/O lines; two
    24-bit counters
  • NIST-traceable calibration certificate and more than 70 signal conditioning options
  • Support for LabVIEW, CVI, and Measurement Studio for Visual Basic and Visual Studio .NET
  • Included Traditional NI-DAQ (Legacy) driver software
Data Sheet

The NI DAQPad-6020E for USB is scheduled for obsolescence. NI recommends the NI USB-6251 or NI USB-6259 for higher performance at a lower price.

For links to these products refer to Related Information on the Resources tab.

Add sensor and high-voltage measurement capability to your E Series device with SCC or SCXI signal conditioning. The National Instruments DAQPad-6020E for USB uses E Series technology to deliver high performance and reliable data acquisition capabilities to meet a wide range of application requirements. You get up to 100 kS/s, 12-bit resolution on 16 single-ended analog inputs. Depending on your type of hard drive, the NI DAQPad-6020E for USB can stream to disk at rates up to 100 kS/s.

Data Sheet | View Pricing and Purchasing Information »

most popular item most popular item(s)
Part Number Description Est Ship  US Dollars Qty
NI DAQPad-6020E for USB
779489-01Data Acquisition: 7 Steps To Success Tutorial Kit5 - 10$ 95.00
DAQPad Accessories
777664-01CA-1000 Connector Accessory Enclosure10 - 15$ 199.00
776896-01BP-1 Battery Pack and Charger 120 VAC Charger Option(Not/Japan)Call$ 309.00
776896-31BP-1 Battery Pack and Charger 230 VAC Charger OptionCall$ 309.00
776896-01BP-1 Battery Pack and Charger 120 VAC Charger Option(Not/Japan)Call$ 309.00
776896-31BP-1 Battery Pack and Charger 230 VAC Charger OptionCall$ 309.00
779475-01most popular item SCC-68 I/O Connector with 4 SCC Module Slots1 - 3$ 299.00
184749-01SH68-68-EP Noise Rejecting, Shielded Cable, 1 m1 - 3$ 99.00
777665-01Rack-Mount Kit for SC-2345 or CA-100010 - 15$ 79.00
777666-01Stacking Kit for SC-2345 or CA-100012 - 20$ 79.00
777459-18Kit, SCC-RTD01, 2-Channel RTD Input Module10 - 15$ 359.00

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected the United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary


View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »