NI ENET-9237

The NI ENET-9237 Wi-Fi data acquisition (DAQ) device includes four channels of analog input with built-in signal conditioning for strain gages, pressure transducers, load cells, and other bridge-based measurements. You can synchronize an ENET-9237 with other devices by using two onboard individually programmable digital trigger lines to export or import sample clocks, start triggers, pause triggers, and reference triggers. In addition, channel-to-earth isolation and calibration traceable to the National Institute of Standards and Technology (NIST) standards offer safety and accuracy for high-quality sensor measurements.

The standard RJ50 connectors on the ENET-9237 are used for mass termination. Crimping an RJ50 connector onto a sensor, which is similar to crimping a standard network cable, provides for quick connection of the sensor to the module.

For screw terminals without the quarter-bridge completion, purchase the NI 9949 RJ50 to screw terminal accessory and a kit of RJ50 cables (quantity of 4). This setup exposes all 10 pins for each channel as screw terminals. The NI 9944 and NI 9945 are accessories for use with quarter-bridge sensors. These accessories have a female RJ50 connector on one end and screw terminals on the other end. Purchase these accessories with a kit of RJ50 cables (quantity 4).

NI Ethernet Data Acquisition
NI Ethernet DAQ devices combine industry-standard Ethernet communication; direct sensor connectivity; and the flexibility of NI LabVIEW software for remote monitoring of electrical, physical, mechanical, and acoustical signals. With built-in signal conditioning and reliable network communication, NI Ethernet DAQ devices stream data in real time for easy-to-use, high-performance remote measurements.

NI-DAQmx Measurement Services Software
NI-DAQmx driver and measurement services software provides easy-to-use configuration and programming interfaces with features such as the DAQ Assistant and automatic code generation to help reduce development time. Every Ethernet DAQ device also includes a copy of LabVIEW SignalExpress LE software so you can quickly acquire, analyze, and present data without programming.

Application Software
In addition to LabVIEW SignalExpress, Ethernet DAQ devices are compatible with the following versions (or later) of NI application software: LabVIEW 7.1¹, LabWindows™/CVI 7.x, and Measurement Studio 7.x. Ethernet DAQ devices are also compatible with ANSI C/C++, C#, Visual Basic .NET, and Visual Basic 6.0.

¹ NI-DAQmx 8.8 (and later) provides support for NI LabVIEW 7.1, 8.2, 8.5, 8.6, and later.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

更多产品信息

相关信息

• Watch the NI Wi-Fi and Ethernet DAQ Guided Tour Video
• Download NI-DAQmx Driver Software
• Learn about NI LabVIEW for Data Acquisition
• Getting Started with NI-DAQmx Tutorials
• Read the Ethernet DAQ Overview

延长保修期

NI设计和制造的所有产品，具有最低的故障发生率；然而，意外故障在所难免。延长保修期意味着：用户在以既定价格购买系统之时，便能经济实惠地享受长达3年的免费维修。此外，用户可获得以下优势：

• 和每次单独维修相比, 能节省可观的费用
• 一旦系统产品出现问题, NI便会提供相应故障的定位、诊断和维修
• NI承担全部产品零件和人工的费用, 并能做出调整, 将硬件恢复至出厂规格

有关保修选择的更多信息:

• 了解更多保修服务的内容
• 联系专家, 咨询延长保修期的详情
• 查看保修和维修策略

校准

NI认为：设备必须得到正确校准，以满足高精度测量的要求。NI提供手动式校准流程、产品的重新校准服务、自动校准软件，以校准诸多的NI测量产品。

• 了解更多校准服务的内容

培训

NI的培训课程是提高NI工具使用效率和成功开发应用程序最快速、最明确的途径。

• 了解更多NI培训与认证的内容
• 查找您身边的培训课程; 查看日程安排

维修服务

用户可在保修期内退还经过注册的产品，而无需另行支付人工和产品零件费用。一旦系统出现问题，NI便会提供相应故障的定位、诊断和维修，并能将硬件恢复至出厂规格。

• 了解更多维修服务的内容
• 联系NI，获取一个商品返修授权(RMA)表格和发货注意。
• 在线查看RMA支持请求级别。
• 注册产品。

技术支持

ni.com/support