- Optional power supply for use with the NI USB-6509
- Region-specific power cable included
- Use for additional sourcing current when driving multiple loads on digital output lines
- May be used as replacement power supply for NI CompactDAQ and some NI GPIB, ENET, and DAQPad devices
The NI USB Digital I/O Power Supply is an optional accessory for use with the NI USB-6509 digital I/O data acquisition device. Use the power supply for additional sourcing current when driving multiple loads on digital output lines. You also can use it as a replacement power supply for NI CompactDAQ chassis. Included in the kit is a +12 VDC power supply with a Switchcraft S760K connector and a region-specific power cord.
780308-01
U.S., 120 VAC
780308-02
Switzerland, 220 VAC
780308-03
Australia, 240 VAC
780308-04
Europe, 240 VAC
780308-06
UK, 240 VAC
780308-07
Japan, 100 VAC
Before installing the power supply, ensure that the data acquisition device is powered off by unplugging the USB cable. Do not remove the external +12 VDC power supply when the device is powered on (in other words, plugged in). Doing so may reboot the USB-6509 and cause device damage.
Informations supplémentaires sur les produits
Informations complémentaires
Documents de spécifications
Résumé des spécifications
|
