- ISA legacy 12-bit, 100 kS/s, 8 analog inputs
- 8 analog inputs; 24 digital I/O lines
- Consider our newer PCI-6025E low-cost DAQ
- NI-DAQ driver software, version 6.9.1 or earlier
- Three 16-bit, 8 MHz counter/timers
 Data Sheet- New! Compare to similar products
The National Instruments Lab-PC-1200AI is a legacy low-cost, multifunction I/O board for ISA computers. It offers up to 100 kS/s, 12-bit performance on eight single-ended or four differential analog inputs; digital triggering; three 16-bit, 8 MHz counter/timers; and 24 digital I/O lines. You may want to instead consider using the NI PCI-6025E, a newer 12-bit PCI device with 16 analog inputs designed with our proven, Measurement Ready E Series architecture that samples at 200 kS/s on multiple channels.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | ISA |
|---|
| OS Support | Windows |
|---|
| Analog Input | |
|---|
| Number of Channels | 8 SE/4 DI |
|---|
| Sample Rate | 100 kS/s |
|---|
| Resolution | 12 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -5..5 V |
|---|
| Minimum Voltage Range | -50..50 mV |
|---|
| Number of Ranges | 14 |
|---|
| On-Board Memory | 512 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 0 |
|---|
| Digital I/O | |
|---|
| Number of Channels | 24 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 2.5 mA/60 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 3 |
|---|
| Resolution | 16 bits |
|---|
| Maximum Source Frequency | 8 MHz |
|---|
| Minimum Input Pulse Width | 125 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 50 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | No |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Number of DMA Channels | 1 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | No |
|---|
| Triggering | Digital |
|---|
| Physical Specifications | |
|---|
| Length | 17.45 cm |
|---|
| Width | 10.56 cm |
|---|
| I/O Connector | 50-pin male |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
