Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCI-1200

Legacy DAQ Board for PCI

Configure Page for: Print PDF Rich Text
  • Consider M Series DAQ for lower prices and higher performance with the PCI-6221.
  • 2 analog outputs, 24 digital I/O lines
  • Three 16-bit, 8 MHz counter/timers
  • NI-DAQ driver software, Version 6.9.3 or earlier
  • 12-bit, 100 kS/s, 8 analog inputs
Data Sheet


National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Increase resolution 16 times, get more I/O, and improve performance and ease of use with the 16-bit, 250 kS/s PCI-6221.

The National Instruments PCI-1200 is a legacy low-cost multifunction DAQ board for PCI. It offers up to 100 kS/s, 12-bit performance on eight single-ended or four differential analog inputs; digital triggering; three 16-bit, 8 MHz counter/timers; two 12-bit analog outputs; and 24 digital I/O lines.

Data Sheet | View Pricing and Purchasing Information »

NI PCI-1200 Complete Package

Each NI PCI-1200 requires:
1 Connector Block 1 Cable NI PCI-1200 Software

Roll over icons above to learn why you need each item in the package.

NI PCI-1200 and Accessories

Hardware Subtotal: $ 1,959
NI PCI-1200 - 777386-01 Qty $ 1,810 each
Connector Block - Screw Terminal
CB-50LP - 777101-01
Qty $ 92 each
Cable -
NB1 Ribbon Cable (2m) - 180524-20
Select length:
Qty $ 57 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
Estimated Shipping Days: 5 - 10
Package Price: $ 1,959
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »