Use the "Configure System" link above to configure an SCXI data acquisition (DAQ) system based on this module.
The NI SCXI-1143 is an 8-channel, programmable lowpass Butterworth filter module that is ideal for antialiasing applications. The architecture of this module consists of a programmable instrumentation amplifier and programmable 8th-order lowpass filter on each channel. Although all channels must be set to the same cutoff frequency, you can programmatically bypass the lowpass filter on a per-channel basis. By using a combination of analog filters and switched capacitor filters, you can achieve the flexibility of 10,000 discrete software-programmable cutoff frequencies while maintaining the low-noise performance of traditional, continuous time-active filters. An external clock input and output are also provided so that you can set the filter cutoff frequency with an external clock in tracking filter applications. The SCXI-1143 conditions signals ranging from ±50 mV to ±5 V, and offers multiplexed and parallel modes of operation.
The NI SCXI-1600 USB DAQ module can be used with this module to create a completely plug-and-play USB data acquisition system. An SCXI chassis is required to house the SCXI-1600 and assorted SCXI modules for a particular system. The NI SCXI-1000 chassis is capable of holding up to four modules while the NI SCXI-1001 can hold up to 12. The SCXI-1600 module can be used only with 32-bit OSs. For 64-bit systems, you can use NI X Series, M Series, E Series, or S Series DAQ modules for control.
You have selected United States as the country where you will use the product(s)
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.