- Programmable gain and filter settings
- Programmable offset calibration
- NI-DAQmx Measurement Services software to simplify configuration and measurements
- 300 Vrms working isolation per channel
- SCXI-1600 (USB) is recommended for controlling this module; also compatible with M Series
- Signal inputs from ±2.5 mV to ±300 V
 Data Sheet | Specifications
(3)
 |
Configure System
most popular item(s) |
Use SCXI Advisor to configure an SCXI data acquisition system based on this module.
The National Instruments NI SCXI-1125 provides 300 Vrms of working isolation and lowpass filtering for each analog input channel. The NI SCXI-1125 architecture is ideal for amplification and isolation of millivolt sources, volt sources, 0 to 20 mA, 4 to 20 mA, and thermocouples. The module can multiplex these eight channels into a single channel of the DAQ device, and you add modules to increase channel count. The module also offers parallel mode operation for increased scan capability.
The SCXI-1600USB data acquisition module can be used in conjunction with this module to create a completely plug-and-play USB data acquisition system. An SCXI chassis is required to house the SCXI-1600 and assorted SCXI modules for a particular system. The SCXI-1000 chassis is capable of holding up to four modules while the SCXI-1001 can hold up to 12.
Additional Product Information
Specifications Documents
Specifications Summary
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
