National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Increase resolution by 16x; increase sampling speed; and improve accuracy with the 16-bit, 250 kS/s PXI-6229.
The National instruments PXI-6025E is the lowest-cost NI PXI data acquisition module using E Series technology to deliver high-performance and reliable data acquisition capabilities in a wide range of applications. You get up to 200 kS/s sampling and 12-bit resolution on 16 single-ended analog inputs. Depending on your type of hard drive, the NI PXI-6025E can stream to disk at rates up to 200 kS/s.
Two CB-50LP connector blocks are required with the common configuration.
Consider full-featured E Series devices for analog triggering, simultaneous waveform I/O, more analog input ranges, and other features.
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Three-year warranty and calibration coverage
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Data Sheet |
Configure System 
