The NI PCI-CAN/LS2 is a two-port, low-speed controller area network (CAN) interface designed for communicating with low-speed CAN devices up to 125 kbits/s. NI PCI-CAN boards use the Philips SJA1000 CAN controller for advanced functionality such as listen-only, self-reception (echo), and advanced filtering modes and new transceivers for sleep/wakeup mode support. Each CAN interface is shipped with NI-CAN device driver software. You can synchronize CAN, data acquisition, and motion boards for PCI using the RTSI bus. All National Instruments CAN interfaces are designed to meet the physical and electrical requirements for in-vehicle (automotive) networks based on CAN.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.