Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

RTD Input Modules

Configure Page for: Print PDF Rich Text
  • Choose signal conditioning on a per-channel basis
  • For low-channel count systems requiring isolation
  • Thermocouple input modules feature cold-junction compensation.
  • Modules available for a wide variety of signal and sensor types
Data Sheet

The 5B Series perform single-channel analog signal conditioning for National Instruments DAQ boards. These modules are housed in an 8 or 16-channel carrier or backplane that is cabled back to the data acquisition board, providing assorted signal conditioning on a channel-by-channel basis. The 5B family provides isolation, noise rejection, and amplification for millivolt sources, volt sources, 4-20 mA sources, 0-20 mA sources, RTDs, thermocouples, strain gauges, and frequency inputs. Analog output current modules are also available.

Data Sheet | View Pricing and Purchasing Information »

Part Number Description Est Ship  US Dollars Qty
RTD Input Modules
776233-C15B34 Type C, 10 ohm copper (at 0 degrees C)Call$ 209.00
776233-C25B34 Type C, 10 ohm copper (at 25 degrees C)Call$ 209.00
776233-N15B34 Type N, 120 ohm nickel10 - 15$ 209.00
776233-P15B34 Type P, 100 ohm platinum, -100 to 100 degrees CCall$ 209.00
776233-P25B34 Type P, 100 ohm platinum, 0 to 100 degrees CCall$ 209.00
776233-P35B34 Type P, 100 ohm platinum, 0 to 200 degrees CCall$ 209.00
776233-P45B34 Type P, 100 ohm platinum, 0 to 600 degrees CCall$ 209.00
778015-015B35 4-wire RTD Input Modules, 100 Ohms at -100 to 100 degrees CCall$ 279.00
778015-025B35 4-Wire RTD Input Modules, 100 Ohms at 0 to 100 degrees CCall$ 279.00
778015-035B35 4-Wire RTD Input Modules, 100 Ohms at 0 to 200 degrees CCall$ 279.00
778015-045B35 4-Wire RTD Input Modules, 100 Ohms at 0 to 600 degrees CCall$ 279.00

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected the United States as the country where you will use the product(s) (change).

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »