- Two 16-bit analog outputs; eight digital I/O lines; two 24-bit counters; analog triggering
- FREE award-winning global services and support at ni.com/support
- Consider M Series for 18-bit resolution, 625 kS/s, and lower costs with the PXI-6281.
- NI-DAQmx driver software and additional measurement services included
- NIST-traceable calibration certificate and more than 70 signal conditioning options
- LabVIEW, LabWindows/CVI, and Measurement Studio for Visual Basic and Visual Studio .NET integration
 Data Sheet |
Configure System 
National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Quadruple your resolution, double your sampling rates, and increase your accuracy with the 18-bit, 625 kS/s PXI-6281.
Add sensor and high-voltage measurement capability to your E Series device with NI SCC or SCXI signal conditioning. The National Instruments PXI-6052E uses E Series technology to deliver high-performance, reliable data acquisition capabilities to meet a wide range of application requirements. You get 333 kS/s, 16-bit performance on 16 single-ended analog inputs. Depending on your type of hard drive, this module can stream to disk at rates up to 333 kS/s. The NI PXI-6052E also features two 16-bit analog outputs; analog and digital triggering; two 24-bit, 20 MHz counter/timers; and eight digital I/O lines (5 V/TTL). Using NI hardware, you have flexible OS, application development environment, and application software choices.
Complete your DAQ system with NI signal conditioning to measure virtually any type of sensor and voltage.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PXI |
|---|
| OS Support | Windows, Real-Time, Linux, Mac OS |
|---|
| DAQ Product Family | E Series |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 16 SE/8 DI |
|---|
| Sample Rate | 333 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 4.747 mV |
|---|
| Minimum Voltage Range | -50..50 mV |
|---|
| Range Accuracy | 0.035 mV |
|---|
| Number of Ranges | 15 |
|---|
| On-Board Memory | 512 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 333 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 1.405 mV |
|---|
| Minimum Voltage Range | 0..10 V |
|---|
| Range Accuracy | 1.176 mV |
|---|
| Current Drive (Channel/Total) | 5 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Number of DMA Channels | 1 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| Triggering | Analog, Digital |
|---|
| Physical Specifications | |
|---|
| Length | 16 cm |
|---|
| Width | 10 cm |
|---|
| I/O Connector | 68-pin male SCSI-II type |
|---|
Factory Installation
Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:
- Installation of all individual hardware and software components as well as full testing to eliminate conflicts
- Custom documentation plus a custom restore and startup utility
- 2-year warranty and calibration coverage
This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
