- Included NI-DAQmx driver software and additional measurement services
- Consider NI M Series for 18-bit resolution, 625 kS/s, and lower costs with the PCI-6281.
- FREE award-winning global services and support at ni.com/support
- NIST-traceable calibration certificate and more than 70 signal conditioning options
- LabWindows/CVI and Measurement Studio for Visual Basic and Visual Studio .NET coordination
- Two 16-bit analog outputs; 8 digital I/O lines; two 24-bit counters; analog triggering
 Data Sheet
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
National Instruments recommends M Series DAQ and NI-DAQmx driver software for new applications. Quadruple your resolution, double your sampling rates, and increase your accuracy with the 18-bit, 625 kS/s PCI-6281.
Add sensor and high-voltage measurement capability to your E Series device with NI SCC or SCXI signal conditioning. The National Instruments PCI-6052E uses E Series technology to deliver high-performance, reliable data acquisition capabilities to meet a wide range of application requirements. You get up to 333 kS/s, 16-bit resolution on 16 singled-ended analog inputs. Depending on your type of hard drive, the NI PCI-6052E can stream to disk at rates up to 333 kS/s. This board features analog and digital triggering capability, as well as two 24-bit, 20 MHz counter/timers; eight digital I/O lines; and two 16-bit analog outputs.
Using NI hardware and driver software options, you have flexible OS, application development environment, and application software choices. Complete your DAQ system with NI signal conditioning to measure virtually any type of sensor and voltage.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PCI |
|---|
| OS Support | Windows, Real-Time, Linux, Mac OS |
|---|
| DAQ Product Family | E Series |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 16 SE/8 DI |
|---|
| Sample Rate | 333 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | No |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 4.747 mV |
|---|
| Minimum Voltage Range | -50..50 mV |
|---|
| Range Accuracy | 0.035 mV |
|---|
| Number of Ranges | 15 |
|---|
| On-Board Memory | 512 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 333 kS/s |
|---|
| Resolution | 16 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 1.405 mV |
|---|
| Minimum Voltage Range | 0..10 V |
|---|
| Range Accuracy | 1.176 mV |
|---|
| Current Drive (Channel/Total) | 5 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 8 DIO |
|---|
| Timing | Software |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | No |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/192 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | No |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | No |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 24 bits |
|---|
| Maximum Source Frequency | 20 MHz |
|---|
| Minimum Input Pulse Width | 10 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 100 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | No |
|---|
| Number of DMA Channels | 1 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| Triggering | Analog, Digital |
|---|
| Physical Specifications | |
|---|
| Length | 17.5 cm |
|---|
| Width | 10.6 cm |
|---|
| I/O Connector | 68-pin male SCSI-II type |
|---|
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
Select your application need to see compatible software options for the NI PCI-6052E.
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Other compatible software: ANSI C/C++, C#, Visual Basic .NET, Visual Basic 6.0
| Graphical Programming |
|
Text-Based Programming |
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
|
