SEA 9510 EnDat 2.2/2.1 Interface Module Driver by S.E.A. Datentechnik GmbH Driver for SEA 9510 C Series EnDat 2.2/2.1 Interface Module

  • 3 independent channels, each separately configurable
  • Supports EnDat 2.2/2.1 standard for digital position encoders (sensors) from Heidenhain
  • High resolution of position value up to 48 bits depending on the encoder type
  • Fast data rates up to 20 kHz
  • Wide operating temperature range from -40 °C to +70 °C
  • Each port provides 5 V DC power supply for encoders (sensors)
  • Download
The SEA 9510 EnDat 2.2/2.1 Interface Module Driver is free software for LabVIEW. When combined with an SEA 9510 C Series module, it enables the integration of up to three EnDat 2.2/2.1 digital position encoders (sensors) into an NI CompactRIO system. The position data is determined simultaneously on all three channels at high data rates and with a high resolution.

The driver, based on the latest NI C Series Module Development Kit (MDK) framework, allows you to seamlessly integrate the SEA 9510 C Series module into the LabVIEW development environment, providing I/O, property, and method nodes for programming directly in LabVIEW FPGA. LabVIEW examples demonstrate the usage and are available through the Example Finder.

The driver software is intended to work with SEA 9510 C Series modules only. SEA 9510 modules can be purchased separately from the S.E.A. web shop. The measurement ports on the SEA 9510 are electrically isolated from the backplane by an isolation barrier. The 5 V DC power supply for the encoders (sensors) is provided through the M12 sockets. Encoders with different power supply requirements need to be supplied externally. Multiple SEA 9510 modules can be operated in a single NI CompactRIO FPGA chassis.

Support Information
This product is supported by the third-party provider and not by NI. For more information, contact S.E.A. Datentechnik GmbH at:

Phone: +492241127370
Website: https://www.sea-gmbh.com/index.php?id=740&L=1
Email: techsupport@sea-gmbh.com

Disclaimer: The Third-Party Add-Ons for LabVIEW on this page are offered by independent third-party providers who are solely responsible for these products. NI has no responsibility whatsoever for the performance, product descriptions, specifications, referenced content, or any and all claims or representations of these third-party providers. NI makes no warranty whatsoever, neither express nor implied, with respect to the goods, the referenced contents, or any and all claims or representations of the third-party providers.