Amulet Technologies 4.3 in. Interface Board RS232 and 8 VDC to 28 VDC Power Input

  • Mounts directly to Amulet 4.3 in. TFT resistive display
  • Connects to controller via RS232 with onboard DB9 port
  • Accepts 8 VDC to 28 VDC power supply
  • Connectivity through display’s mass terminal port
  • Spacers and screws included
  • Configure Complete CompactRIO System
Amulet displays have two onboard ports: mini USB and mass terminal connector. You can use the mini USB to connect the display to your development system or create your own custom cable with the mass terminal connector. With either of these options, you can provide a signal and power to the display. However, if you want an alternative method for this, try the Amulet Technologies 4.3 in. Interface Board, which transfers data over a serial cable that uses a DB9 connector with built-in retention. It accepts an 8 VDC to 28 VDC input, so you can also use it to power the display with the same power supply you use for your hardware built on the LabVIEW reconfigurable I/O architecture. Use the included spacers and screws designed specifically for this display to connect the display securely to this board.

No part number and pricing information available for Amulet Technologies 4.3 in. Interface Board.