DTMB Digital Video Signal Generation Toolkit - MaxEye Technologies Create DTMB Standard-Based Test Signals for Receiver Testing

  • Supports single-carrier and multicarrier modes
  • Mapping: 4QAM, 4QAM-NR, 16QAM, 32QAM, 64QAM, all frame header modes
  • FEC: BCH+LDPC code supports all coding rates (0.4, 0.6, and 0.8)
  • Support for pulse shaping filter, roll off of 0.05
  • OFDM cosine windowing, support for simulation of AWGN and I/Q impairments
  • Payload configuration: MPEG TS files, PN sequence, user-defined bits, test pattern
  • Download
The MaxEye Technologies DTMB Digital Video Signal Generation Toolkit is an ideal test tool for generating test signals with different configurations and conditions to completely test the receiver during design, verification, and manufacturing to characterize receiver performance. You can verify receiver performance by implementing bit error rate (BER) analysis at the various stages of the receiver (BER after demodulation, BER after inner decoding, and BER after outer decoding).

This toolkit offers a standards-based test solution for designing, evaluating, and manufacturing Digital Terrestrial Multimedia Broadcast (DTMB) equipment. DTMB is a TV standard for mobile and fixed terminals used in China, Hong Kong, and Macau.

Support Information
For technical support, contact MaxEye Technologies at:
Phone: +91-80-2527-0024, +91-94-4806-7717
Email: info@maxeyetech.com, ramesh@maxeyetech.com
Web: maxeyetech.com

Disclaimer: The Third-Party Add-Ons for LabVIEW on this page are offered by independent third-party providers who are solely responsible for such products. NI shall have no responsibility whatsoever for the performance of the Third-Party Add-Ons. The sale of these Third-Party Add-Ons is subject to the Terms and Conditions of Sale of the third-party provider.