NI PXI-2797 40 GHz 6x1 Terminated Multiplexer (SP6T)

  • Print
  • PDF
  • Rich Text
  • 40 GHz performance (typical): < 0.6 dB insertion loss; VSWR < 1.65; isolation > 80 dB
  • 18 W maximum RF carry power
  • 50 ohm characteristic impedance
  • Onboard relay count tracking
  • Ability to store RF path calibration information with NI Switch Executive
  • Configure Complete PXI System
  • View Support Resources
The NI PXI-2797 is a 6x1 terminated multiplexer switch module for routing RF or microwave signals in automated test applications. Designed to operate with less than 1 dB insertion loss up to 40 GHz, the PXI-2797 appears almost invisible to signals at much lower frequencies as well. Use this terminated multiplexer when high-power signal reflections are a concern and 50 Ω terminations are required. The PXI-2797 is also well-suited for passing high-order harmonics from RF upconverters, such as the NI PXIe-5673 6.6 GHz RF signal generator, or routing multiple sources to RF downconverters, such as the NI PXIe-5663 6.6 GHz RF signal analyzer.

Specifications Documents

Specifications Summary

General
Product Family Switches
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
Part Number 782357-01
Product Name PXI-2797
Switches
Switch Type Multiplexer , RF
Maximum Switching Voltage AC 30 Vrms
Maximum Carry Current 0.89 A
Maximum Switching Power 18 W
Bandwidth 40 GHz
Relay Type Electromechanical
Relay Count Tracking Yes
VSWR Ratio 1.65
Isolation (Typical) 80 dB
Insertion Loss (Typical) 0.6 dB
Terminated Yes
Characteristic Impedance 50 Ohm
Multiplexer Config Wire Mode 1-wire
Part Number Description Est Ship  US Dollars Qty
NI PXI-2797
782357-01NI PXI-2797 40 GHz 6x1 Terminated Multiplexer (SP6T)12 - 20$ 4,899.00

Guarantee your price for 30 days (learn more)

Instant Quote

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support