The NI PXI-2543 is a terminated, dual 4x1 multiplexer switch module designed for routing RF signals up to 6.6 GHz in production test applications. It features high-performance solid-state relays that offer unique benefits such as unlimited relay life and fast switching time. Front-mounted SMA connectors provide easy connection to your RF devices, and the module features termination on every COM line and channel. The 50 Ω termination on the channel and COM lines minimize reflections of the RF signal and protect your instruments.
Note: The bandwidth specification of a switch module is not an absolute specification and is determined by vendor standards. Although you can route higher frequency signals through this switch module, they encounter more degradation than those at lower frequencies. To determine the best switch module for your application, refer to the insertion loss, VSWR, and isolation specifications of the product for the bandwidth you need. For more information on choosing the right RF switch for your application, review "Guide to Selecting an RF Switch" under the Resources tab of this page.
ICES
,
CE
,
IEC
,
FCC Part 15
,
UL - Product Safety
VSWR Ratio
1.6
VSWR Frequency
6.6 GHz
You have selected United States as the country where you will use the product(s)
(change).
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
Installation and integration test of all individual hardware
Courtesy installation of system driver sets and application development environments
Extended warranty and calibration coverage for up to five years
Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
