To use the NI PXIe-4844 , you need all items in the diagram below. Select Option 1 if you already own a PXI System, or Option 2 if you do not already own a chassis, controller, or software.
Roll over the icons below to learn why you need each item in the system
PXI System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Adapter
|
|
1 Cable
|
|
NI PXIe-4844
|
|
Chassis
|
|
Controller
|
|
Software
|
|
NI PXIe-4844 and Accessories Only
|
Because FC/APC connectors are male, female to female bulkhead adapters are necessary to connect FC/APC optical sensor arrays to the FC/APC to LC/APC adapter cables.
You need FC/APC to LC/APC adapter cables to connect FC/APC optical sensor arrays to your optical sensor interrogator. Leaving the adapter cables on the instrument helps prevent wear and contamination of the interrogator's optical connectors.
The chassis provides rugged, modular housing for the controller and modules and contains the high-performance PXI backplane, which includes the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your PXI modules.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.