The Drivven O2 Sensor Module Kit provides an interface for multiple wideband and narrowband exhaust oxygen sensors, including Bosch LSU 4.2 wideband oxygen sensors and inputs for zirconium-dioxide-element narrowband oxygen sensors (most common). The kit includes the O2 Sensor Module, a single Bosch LSU 4.2 wideband O2 sensor, a 10 ft cable, a plug and bung, and LabVIEW FPGA VIs and LabVIEW Real-Time VIs for module interface and diagnostics. You can purchase additional Bosch O2 sensors separately.
You can use Drivven C Series modules with NI cRIO-911x, NI cRIO-907x, and NI R Series expansion systems under the following conditions:
-You must leave one empty chassis slot between Drivven and NI modules
-You need to maintain an ambient system operating temperature of 0 °C to 45 °C
-Typical NI module specifications may not apply when used in a system with Drivven modules
-Warranted specifications are guaranteed for all NI modules except thermocouple modules when used in a system with Drivven modules
-The NI 9214 is recommended for thermocouple measurements in CompactRIO systems using Drivven modules
-NI Scan Interface mode, autodetection, and ID mode do not work when using Drivven modules
