Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXIe-5186

5 GHz, 12.5 GS/s, 8-Bit Digitizer

Configure Page for: Print PDF Rich Text
  • Tektronix, Enabling Technology for superior signal fidelity
  • 5 GHz bandwidth with 12.5 GS/s maximum sampling rate
  • Data transfer rates of >700 MB/s from device to host
  • 2 channels with 50 ohm and 1 megaohm input impedance paths
  • 3-slot, 3U PXI Express form factor
  • Deep memory from 16 MB/ch (standard) up to 512 MB/ch (optional)


The NI PXIe-5186 digitizer, codeveloped by National Instruments and Tektronix, delivers a new level of performance in the small-form-factor, low-power PXI platform. Tektronix technology provides the trusted measurement fidelity of Tektronix oscilloscopes. The digital back end uses NI Synchronization and Memory Core (SMC) technology to deliver high-data throughput at rates greater than 700 MB/s and multimodule synchronization with ±80 ps channel-to-channel skew. The result is a digitizer that features leading analog performance optimized for automated test applications.

Specifications Documents

View Data Sheet

Specifications Summary

General
Product Family Digitizers/Oscilloscopes
Form Factor PXI Platform
PXI Bus Type PXI Express
Part Number 782058-01 , 782058-02
Operating System/Target Windows
Length 21.6 cm
Width 6.2 cm
Height 13 cm
I/O Connector SMA female
Product Name NI PXIe-5186
Analog Input
Channels 2
Resolution 8 bits
Simultaneous Sampling Yes
Sample Rate 12.5 GS/s
Random Interleaved Sampling (RIS) Rate 250 GS/s
Bandwidth 5 GHz
On-Board Memory 16 MB/ch , 512 MB/ch
Frequency Range 0 Hz - 5 GHz
Max Voltage -0.5 V - 0.5 V
Provides Digital Down Conversion? No
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0

NI PXIe-5186 Packages

To use the NI PXIe-5186 , you need all items in the diagram below. Select Option 1 if you already own a PXI System, or Option 2 if you do not already own a chassis, controller, or software.

Roll over the icons below to learn why you need each item in the system

PXI System
1 Cable NI PXIe-5186 Chassis Controller Software
NI PXIe-5186 and Accessories Only
NI PXIe-5186
782058-01 Qty $ 37,320 each
782058-02 Qty $ 42,650 each

Required Accessories
Cable - Shielded
SMA to SMA, Coax, RG-402, 50 Ohm, 1 meter - 781845-01
Qty $ 158 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show

Package Price: $ 37,478
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Get Started with PXI
Choose from hundreds of specialized instruments to create a PXI System that suits your measurement needs and can scale for future applications. Then, we'll help you choose the right hardware and software to complete your configuration.

Add More Measurements and I/O Modules
Use the PXI Advisor to choose from a variety of modules including analog I/O, digital I/O, switching and more. Then, complete and price the PXI System.

Add Modules

Preview a Complete System
View and price a complete PXI configuration including the NI PXIe-5186, chassis, and controller. Starting from the default configuration, you can add modules, accessories, and software and customize your system.

View and Price a Configured System
You need a cable to transmit signals to your device.
The chassis provides rugged, modular housing for the controller and modules and contains the high-performance PXI backplane, which includes the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your PXI modules.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support