Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 6583R

300 Mbit/s, 32 SE and 16 LVDS NI FlexRIO Digital Instrument

Configure Page for: Print PDF Rich Text
  • Maximum 200 MHz clock rate (300 Mbit/s data rates using double data rate mode)
  • 35 (32 + 3 PFI) single-ended channels with selectable voltages from 1.2-3.3V with 10 bit resolution
  • 19 (16 + 3 PFI) LVDS or mLVDS bidirectional channels
  • Mates with an NI FlexRIO FPGA module for reconfigurable control of digital testing and communication
  • Per-pin direction control on all channels with 9 ns state change time
  • Simultaneous operation of single ended and differential channels
Configure Complete PXI System


The NI 6583 is a mixed-logic 200 MHz digital adapter module for NI FlexRIO field-programmable gate array (FPGA) modules. This adapter module features 32-single ended (SE) and 16 low-voltage differential signaling (LVDS or mLVDS) channels capable of up to 200 MHz clock rates with up to 300 Mbit/s data rates using double data rates (DDR) on a 150 MHz sample clock (sampling on both the rising and falling edges of the clock).

Single-Ended
The 32 single-ended channels feature selectable voltages from 1.2V to 3.3V with 10 bit resolution. These are individually controlled, hardware-timed bidirectional channels and are thus ideal for communication protocols such as SPI and I2C.

LVDS / mLVDS
The 16 differential (LVDS or mLVDS) channels are also individually controlled, hardware-timed bidirectional channels capable of up to 300 Mbit/s data rates.

Note : Two separate part numbers exist for the LVDS or the mLVDS option.

You can use NI LabVIEW FPGA Module software with a programmable onboard FPGA to emulate custom or standard digital protocols, perform onboard analysis such as real-time hardware compare, or even embed existing VHDL IP.

View Pricing and Purchasing Information »

Specifications Documents

Specifications Summary

Sorry, this content is temporarily unavailable.

NI 6583

Bundle Contents
Estimated Shipping Days : 5 - 10 Price: $ 8,765

Adapter Module

NI 6583 (32 Single Ended at 1.2, 1.5, 1.8, 2.5 or 3.3V and 16 LVDS, 200 MHz SDR, 300 Mbps DDR) 781320-01 Included in price

A digital adapter module for single ended and LVDS channels running simultaneously for mixed signal digital communication at high speeds.

FPGA Module

NI PXIe-7965R NI FlexRIO FPGA Module (Virtex-5 SX95T FPGA, 512 MB DRAM) 781207-01 Add $ 2,690

A PXI Express based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 SX95T FPGA and 512 MB of onboard DRAM. The SX95T FPGA has 8,160 logic slices, 8.7 Mbits of block RAM, and 640 DSP slices for hardware multiplication and signal processing.

NI PXIe-7962R NI FlexRIO FPGA Module (Virtex-5 SX50T FPGA, 512 MB DRAM) 781206-01 Included in price

A PXI Express based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 SX50T FPGA and 512 MB of onboard DRAM. The SX50T FPGA has 8,160 logic slices, 4.7 Mbits of block RAM, and 288 DSP slices for hardware multiplication and signal processing.

NI PXIe-7961R NI FlexRIO FPGA Module (Virtex-5 SX50T FPGA) 781205-01 Subtract $ 1,760

A PXI Express based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 SX50T FPGA. The SX50T FPGA has 8,160 logic slices, 4.7 Mbits of block RAM, and 288 DSP slices for hardware multiplication and signal processing.

NI PXI-7954R NI FlexRIO FPGA Module (Virtex-5 LX110 FPGA, 128 MB DRAM) 780563-01 Add $ 830

A PXI based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 LX110 FPGA and 128 MB of onboard DRAM. The LX110 FPGA has 17,280 logic slices, 4.6 Mbits of block RAM, and 64 DSP slices for hardware multiplication and signal processing.

NI PXI-7953R NI FlexRIO FPGA Module (Virtex-5 LX85 FPGA, 128 MB DRAM) 780562-01 Subtract $ 520

A PXI based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 LX85 FPGA and 128 MB of onboard DRAM. The LX85 FPGA has 12,960 logic slices, 3.4 Mbits of block RAM, and 48 DSP slices for hardware multiplication and signal processing.

NI PXI-7952R NI FlexRIO FPGA Module (Virtex-5 LX50 FPGA, 128 MB DRAM) 780561-01 Subtract $ 2,070

A PXI based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 LX50 FPGA and 128 MB of onboard DRAM. The LX50 FPGA has 7,200 logic slices, 1.7 Mbits of block RAM, and 48 DSP slices for hardware multiplication and signal processing.

NI PXI-7951R NI FlexRIO FPGA Module (Virtex-5 LX30 FPGA) 780560-01 Subtract $ 3,315

A PXI based FPGA module which features a LabVIEW FPGA programmable Xilinix Virtex-5 LX30 FPGA. The LX30 FPGA has 4,800 logic slices, 1.1 Mbits of block RAM, and 32 DSP slices for hardware multiplication and signal processing.

Cables

Single Ended Cables

50 Ohm Shielded Cable for HSDIO, 1 m 196275-01 Add $ 319

A shielded 50 Ohm cable for high-speed digital I/O products which is designed to preserve signal quality through impedance matching and minimal crosstalk.

50 Ohm Unshielded Cable for HSDIO, 1 m 195949-01 Add $ 212

A low-cost, unshielded 50 Ohm cable is impedance matched for use with NI high-speed digital I/O products.

50 Ohm Flying-Leads Cable for HSDIO, 1.5 m 192681-1R5 Add $ 535

The flying-lead cable is a shielded 50 Ohm cable, with paired signal and ground lines for each channel to preserve signal quality. Because the leads are broken out by the cable, an NI Connector Block is not required.

Differential Cables

SHB12X-B12X Shielded Cable, LVDS, 1 Meter 192344-01 Add $ 319

SHB12X-H3X24 Differential Flying-Lead/LA Cable for HSDIO, 1.5 m 196236-1R5 Add $ 745

Connector Blocks

Single Ended Connector Blocks

Single-Ended Digital I/O Accessory with Header Pins 778592-01 Add $ 341

A breakout box for NI single-ended high-speed digital instruments to give you direct access to all pins on the device through header pins.

Single-Ended Digital I/O Accessory with SMB Connections 778747-01 Add $ 1,120

A rack-mountable breakout box for NI single-ended high-speed digital instruments to give you direct access to all pins on the device through SMB connectors.

Differential Connector Blocks

Accessory for LVDS Digital Waveform Generator/Analyzers 779323-01 Add $ 855

A terminal block with SMA connectors for the highest signal quality differential digital signals.

Software

LabVIEW FPGA Module, Include 1 Year SSP 778694-35 Add $ 2,590

LabVIEW Full Development System, Windows, English, Include 1 Year SSP 776670-35 Add $ 2,699

Estimated Shipping Days : 5 - 10 Price: $ 8,765
Guarantee your price for 30 days (learn more)

You have selected United States as the country where you will use the product(s) (change).

Updating...

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »