Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXIe-6547

200 Mbits/s Digital Stimulus Response Instrument

Configure Page for: Print PDF Rich Text
  • 100 MHz maximum clock rate (200 Mbps in double data rate mode)
  • 32 channels with software-selectable per-channel, per cycle (on 24 ch), directional control
  • 1.2 to 3.3 V programmable voltage levels in 100 mV steps (VOH and VIH only)
  • 400 MB/s for acquisition and generation - typical data streaming rates
  • Advanced features including real-time hardware compare on 24 ch, multibank data delay, and scripting
  • Advanced timing features such as onboard direct digital synthesis (DDS)-based high-resolution clock
Configure Complete PXI System
View Data Sheet


The NI PXIe-6547 is a PXI Express-based 32-channel digital instrument capable of data rates up to 100 Mbps using single data rate or up to 200 Mbps using double data rate (clocking on the rising and falling edge of a 100 MHz (max) clock) . You can programmatically select voltages ranging from 1.2 to 3.3 V in 100 mV steps, giving you 22 distinct voltages to choose from. This instrument features per channel, per cycle (on 24 channels only) direction control. In addition, streaming rates at 400 MB/s to and from the PC make the NI PXIe-6547 ideal for applications requiring high data streaming rates.

The PXIe-6547 features an onboard direct digital synthesis (DDS) clock that you can use to clock your digital data up to 100 MHz with sub-hertz resolution. Also, you can use multiple banks of data delay for rise-time/fall-time tests or for calibrating propogation delays on multiple traces.

The PXIe-6547 features real-time onboard hardware compare on 24 channels at up to 100 MHz allowing you to perform tests requiring real time analysis such as bit error rate. Furthermore, you can use scripting to loop/link through multiple waveforms stored on the onboard memory or make real time decisions based on triggers and events.

View Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

View Data Sheet

Specifications Summary

General
Product Family High-Speed Digital I/O
Form Factor PXI Platform
PXI Bus Type PXI Express
Part Number 781011-03 , 781011-02
Operating System/Target Windows
Triggering Digital
Synchronization Bus (RTSI) Yes
Length 21.6 cm
Width 2 cm
Height 13 cm
I/O Connector 68-pin VHDCI female
Product Name NI PXIe-6547
Analog Input
Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 32
Timing Hardware
Maximum Clock Rate 100 MHz
Maximum Data Rate / Channel 200 Mbits/s
Logic Levels 1.2 V , 3.3 V , 1.8 V , 1.5 V , LVTTL , TTL , Programmable , 2.5 V
Differential Logic No
Watchdog Timer No
Supports Handshaking I/O? No
Supports Pattern I/O? Yes
Digital Interface Parallel
Per Cycle Bidirectional Yes
Logic State Control Per Cycle Bidirectional
Supports Hardware Data Compare? Yes
Supports Linking/Looping Segments? Yes
Supports Data Delay? Yes
Offers Dedicated Bandwidth? Yes
On-Board Memory 64 MB

NI PXIe-6547 Packages

To use the NI PXIe-6547 , you need all items in the diagram below. Select Option 1 if you already own a PXI System, or Option 2 if you do not already own a chassis, controller, or software.

Roll over the icons below to learn why you need each item in the system

PXI System
1 Connector Block 1 Cable NI PXIe-6547 Chassis Controller Software
NI PXIe-6547 and Accessories Only
NI PXIe-6547
781011-02 Qty $ 6,930 each
781011-03 Qty $ 8,530 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
Estimated Shipping Days: Call
Package Price: $ 6,930
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Get Started with PXI
Choose from hundreds of specialized instruments to create a PXI System that suits your measurement needs and can scale for future applications. Then, we'll help you choose the right hardware and software to complete your configuration.

Add More Measurements and I/O Modules
Use the PXI Advisor to choose from a variety of modules including analog I/O, digital I/O, switching and more. Then, complete and price the PXI System.

Add Modules

Preview a Complete System
View and price a complete PXI configuration including the NI PXIe-6547, chassis, and controller. Starting from the default configuration, you can add modules, accessories, and software and customize your system.

View and Price a Configured System
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
The chassis provides rugged, modular housing for the controller and modules and contains the high-performance PXI backplane, which includes the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your PXI modules.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

View Pricing and Purchasing Information »

Back to top »