The NI USB-9215A DAQ module features integrated signal conditioning that provides plug-and-play connectivity via USB for faster setup and measurements. It offers four channels of simultaneously sampled voltage inputs with 16-bit accuracy to provide minimal phase delay when scanning multiple channels. With both screw terminal and BNC connector options, the USB-9215A is designed for flexible and low-cost signal wiring. In addition, this module includes 250 Vrms channel-to-earth ground isolation for safety, noise immunity, and high common-mode voltage range.
The USB-9215A is compatible with Windows OSs when using NI-DAQmx driver software, and Mac OS X and Linux OSs when using NI-DAQmx Base driver software. This USB DAQ module is not compatible with the Traditional NI-DAQ (Legacy) driver.
Every NI USB DAQ module includes a copy of LabVIEW SignalExpress LE for Windows so you can quickly acquire, analyze, and present data without programming. In addition to LabVIEW SignalExpress, USB DAQ modules are compatible with the following versions (or later) of NI application software: LabVIEW 7.x, LabWindows™/CVI 7.x, or Measurement Studio 7.x; or LabVIEW with the LabVIEW Real-Time Module 7.1. USB DAQ modules are also compatible with ANSI C/C++, C#, Visual Studio .NET, and Visual Basic 6.0.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
You have selected United States as the country where you will use the product(s)
(change).
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
