Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-2515

High-Speed Digital I/O Signal Insertion Switch

Configure Page for: Print PDF Rich Text
  • 35 high-bandwidth digital I/O pass-through lines for clock rates up to 200 MHz
  • BNC connectors provide access to each digital line via two signal insertion buses
  • Insert SMUs for DC parametric tests or insert digitizers for analog characterization
  • 50 MHz typical bandwidth on insertion buses
  • Compatibility with all single-ended NI high-speed digital I/O (HSDIO) products
  • Available in Q1 2010
Compare to similar products
Configure Complete PXI System
View Data Sheet and Specifications

The NI PXI-2515 is a multiplexer switch module for the PXI platform that enables connectivity by routing high-speed digital I/O (DIO) signals between a device under test (DUT) and an NI high-speed DIO device or parametric measurement devices. You can use DC devices such as source measure units (SMUs) and digital multimeters (DMMs) with high-speed digital devices on the 35 (32 data and three timing and trigger lines) digital channels and two analog buses. With the PXI-2515, you can perform parametric tests on digital pins without external connectivity or impedance mismatch challenges.

Data Sheet | View Pricing and Purchasing Information »

No part number and pricing information available for NI PXI-2515.

You have selected the United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Family Switches
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
Operating System/Target Real-Time , Windows
LabVIEW RT Support Yes
Triggering Digital
Synchronization Bus (RTSI) Yes
Length 21.6 cm
Width 2 cm
Height 13 cm
I/O Connector 50-pin VHDCI female
Product Name NI PXI-2515
Switches
Switch Type Signal Insertion Switch
Max Switching Voltage DC (Pollution Deg. 2) 30 VDC
Max Switching Current 250 mA
Maximum Carry Current 300 mA
Maximum Switching Power 3 W
Bandwidth 1 GHz
Relay Type Reed
Relay Count Tracking Yes
Voltage Category CAT I
Product Certifications UL - Product Safety
Path Resistance (Typical) 2 Ohm
Thermal EMF 50 µV
Number of Relays 35
Relay Form SPST (closed)

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »