Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXI-2510

68-Channel, 2 A Fault Insertion Unit (FIU)

Configure Page for: Print PDF Rich Text
  • Simulate open, pin-to-pin, short-to-battery, and short-to-ground faults
  • 68 channels with two fault bus lines
  • Up to 2 A and 150 V (60 W maximum)
  • Control from LabVIEW Real-Time for deterministic operation
  • Triggering via the PXI backplane
Compare to similar products
Configure Complete PXI System

The NI PXI-2510 fault insertion unit (FIU) is designed for use in hardware-in-the-loop (HIL) applications and electronic reliability tests. Each module has a set of feedthrough channels, which when closed make the switch transparent to the system. You can open or short these channels to one of two fault buses, each of which offers a multiplexer with four possible inputs. You can use this architecture to simulate open or interrupted connections as well as shorts between pins, shorts to battery voltages, and shorts to ground on a per-channel basis. When controlled with the NI LabVIEW Real-Time Module, this FIU is ideal for validating the reliability of control systems such as engine control units (ECUs), full authority digital engine controls (FADECs), and more with up to 2 A loading conditions.

View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below »   Configure and Price a Complete PXI System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
778572-10 NI PXI-2510 12 - 20 $ 2,499

Each NI PXI-2510 requires: 1 Cable, 1 Terminal Block

NI PXI-2510 Cable Terminal Block
Step 2: Select Cable
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
781090-01 Cable for NI PXI-2510 (To 3, 50-pin D-SUB)
NI Recommended		 5 - 10 $ 299
781090-02 Cable for NI PXI-2510 (To 160-pin DIN) 5 - 10 $ 299
781090-03 Cable for NI PXI-2510 (To Bare Wire) 5 - 10 $ 249
Step 3: Select Terminal Block
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779305-01 NI TBX-50, 50 Pin Dsub Screw Terminal Block
NI Recommended		 10 - 15 $ 249
Step 4: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Family Switches
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
Operating System/Target Real-Time , Windows
LabVIEW RT Support Yes
Triggering Digital
Synchronization Bus (RTSI) Yes
External Clocking No
Length 16 cm
Width 10 cm
Height 2 cm
I/O Connector 100-pin DIN
Slot Two Module No
Module Width 1
MXI Compatible Yes
Product Name NI PXI-2510
Switches
Switch Type Signal Insertion Switch
Max Switching Voltage DC (Pollution Deg. 2) 150 Vrms
Maximum Switching Voltage AC 150 Vrms
Max Switching Current 2 A
Maximum Carry Current 2 A
Maximum Switching Power 60 W
Bandwidth 6.5 MHz
Relay Type Electromechanical
Relay Count Tracking Yes
Voltage Category CAT I
Product Certifications CE , RoHS , UL - Product Safety , WEEE
Path Resistance (Typical) 150 mOhm
Scan Rate 300 cycles/s

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »