The NI ENET-9213 Ethernet data acquisition (DAQ) device includes 16 thermocouple input channels with 24-bit resolution, an autozero channel, open-thermocouple detection, and cold-junction compensation for high-accuracy temperature measurements. In addition, channel-to-earth isolation and calibration traceable to the National Institute of Standards and Technology (NIST) standards provide safety and accuracy for high-quality sensor measurements. The ENET-9213 is similar to the ENET-9211 four-channel thermocouple device but with four times the channel count and almost 100 times the sample rate.
NI Ethernet Data Acquisition
NI Ethernet DAQ devices combine industry-standard Ethernet communication; direct sensor connectivity; and the flexibility of NI LabVIEW software for remote monitoring of electrical, physical, mechanical, and acoustical signals. With built-in signal conditioning and reliable network communication, NI Ethernet DAQ devices stream data in real time for easy-to-use, high-performance remote measurements and control.
NI-DAQmx Measurement Services Software
Each ENET-9213 kit includes NI-DAQmx 8.9 or later.* NI-DAQmx driver and measurement services software provides easy-to-use configuration and programming interfaces with features such as the DAQ Assistant and automatic code generation to help reduce development time. Every NI Ethernet DAQ device also includes a copy of LabVIEW SignalExpress LE data-logging software so you can quickly acquire, analyze, and present data without programming.
*Visit ni.com/info and enter “9213swupdate” to download the latest NI-DAQmx software.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
