The NI 9213 is a high-density thermocouple module for NI C Series carriers designed for higher-channel-count systems. With this module, you can add thermocouples to mixed-signal test systems without taking up too many slots.
The NI 9213 is similar to the NI 9211 four-channel thermocouple module except it features four times the channel count and almost 100 times the sample rate. In high-speed mode each channel can sample at 75 S/s. When 12 or fewer channels are used, the max sample rate per channel can increase to 100 S/s.
You can use up to eight NI 9213 modules in an NI CompactDAQ chassis or CompactRIO chassis for 128 thermocouple measurements in a single chassis, or deploy a single module in any of the USB, Ethernet, or Wi-Fi carriers for C Series modules.
Each shipping kit contains:
-NI 9213 module with spring-terminal connectivity
-NI 9940 backshell for cabling and strain relief
-Spring-terminal tool for signal wire insertion
To use the NI 9213 , you need all items in the diagram below. Select Option 1 if you already own a C Series System, or Option 2 if you do not already own a chassis, controller, or software.
Roll over the icons below to learn why you need each item in the system
Create a complete system with the NI 9213 and its accessories. However, the NI 9213 is compatible with multiple C Series Platforms, NI CompactDAQ and CompactRIO. Please review the comparison information below and select a platform to begin configuring your system.
Laboratory - 30 g shock and 0.3 grms operational vibration
Field Work - 50 g shock (Class I, Div 2 for Hazardous Locations)
The chassis provides rugged, modular housing for your controller (if using CompactRIO) and C Series modules. A high-performance backplane in the chassis contains the system's data, timing, and triggering buses.
The controller runs your application and interfaces with your C Series modules. If you are using the NI CompactDAQ platform, then a Personal Computer (PC) will act as the controller of your system. However, if the CompactRIO platform is used then an embedded real-time controller will be used instead.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This device is compatible with a different programming languages depending on the platform used. If you are using the NI CompactDAQ platform then this device is compatible with LabVIEW, C/C++, Visual Basic, and .NET. However, if the CompactRIO platform is used then this device requires the LabVIEW FPGA Module (sold separately), the LabVIEW Real-Time Module (sold separately) and NI-RIO driver software (included with the hardware).
You have selected United States as the country where you will use the product(s)
(change).
