16x1 multiplexer Fully software configurable 150 V, CAT I switching 500 MHz bandwidth MCX direct connectivity 50 Ω characteristic impedance
The NI PXIe-2593 is a high-density 50 Ω RF relay module. You can programmatically configure it as an unterminated multiplexer, externally terminated multiplexer, or dimensionally flexible sparse matrix. Each configuration handles signal frequencies from DC to beyond 500 MHz. This one-slot switch module uses high-density push-on MCX connectors for discrete yet manageable cabling. The NI PXIe-2593 is designed to integrate with high-frequency instruments such as the NI PXI-5404 frequency generator and the NI PXI-5112 high-speed digitizer.
View Diagram Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change ).
Additional Product Information
Related Information
Specifications Summary
General
Product Family Switches
Form Factor PXI Platform
PXI Bus Type PXI Hybrid Compatible
, PXI Express
Operating System/Target Windows
, Real-Time
, Linux
LabVIEW RT Support Yes
Triggering Digital
Synchronization Bus (RTSI) Yes
External Clocking No
Length 16.0
cm
Width 10.0
cm
Height 2.0
cm
I/O Connector MCX
Slot Two Module No
Module Width 1
MXI Compatible Yes
Product Name PXIe-2593
Switches
Switch Type Multiplexer
, RF
Max Switching Voltage DC (Pollution Deg. 2) 150.0
Maximum Switching Voltage AC 150.0
Max Switching Current 0.500
Maximum Carry Current 1.0
Maximum Switching Power 10.0
Bandwidth 500.0
Relay Type Electromechanical
Relay Count Tracking Yes
Voltage Category CAT I
Product Certifications CE
, IEC
, UL - Product Safety
, FCC Part 15
, C-Tick
, CAN/CSA
Scan Rate 110.0
cycles/s
Isolation (Typical) 80.0
dB
Insertion Loss (Typical) 0.900
dB
Terminated No
Characteristic Impedance 50.0
Ohm
Mux Config Wire Mode 1-wire
, 1-wire
Select your application need to see compatible software options for the NI PXIe-2593.
Graphical Programming
Text-Based Programming
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
Graphical Programming
Text-Based Programming
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
You have selected United States as the country where you will use the product(s) (change ).
Driver Software
