Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 9425

32-Channel, 24 V, 7 µs, Sinking Digital Input Module

Configure Page for: Print PDF Rich Text
  • 32-channel, 7 µs sinking digital inputs
  • Compatible with 12 and 24 V levels
  • Industry-standard 37-pin D-Sub connector
  • Hot-swappable operation
  • Extreme industrial certifications/ratings
  • -40 to 70 °C operating range
Compare to similar products
Configure Complete CompactRIO or CompactDAQ System
View Data Sheet and Specifications

The National Instruments 9425 is a 32-channel, 7 µs, sinking digital input C Series module for any NI CompactDAQ or CompactRIO chassis. Each channel is compatible with 12 and 24 V levels and features 1,000 Vrms of transient overvoltage protection from channel to earth ground. The NI 9425 contains an industry-standard 37-pin D-Sub connector for low-cost cabling to a wide variety of 37-pin accessories available from NI or other vendors. It works with industrial logic levels and signals for direct connection to a wide array of industrial switches, transducers, and other devices.

The NI 9425 is a static digital module, so you can use it only to perform software-timed or static operations when installed in an NI CompactDAQ chassis.

The NI 9933 (or other 37-pin D-Sub connector) is required for use with the NI 9425. The NI 9933 includes a screw-terminal connector with strain relief as well as a D-Sub solder cup backshell for creating custom cable assemblies.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete CompactDAQ/CompactRIO System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
  NI 9425      
779139-01 Module Only
NI Recommended		 1 - 2 $ 319
780176-01 Module with Conformal Coating Call $ 449

Each NI 9425 requires: 1 Connectivity Accessory

NI 9425 Connectivity Accessory
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779103-01 NI 9933 37pin D-Sub connector kit
NI Recommended		 1 - 2 $ 149
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Cable
778621-01 SH37F-37M-1 37-Pin Female to Male Shielded I/O Cable, 1 m 5 - 10 $ 29
778621-02 SH37F-37M-2 37-Pin Female to Male Shielded I/O Cable, 2 m 5 - 10 $ 39
778620-04 SH37F-P-4 37-Pin Female to Pigtail Shielded I/O Cable, 4 m 5 - 10 $ 29
778673-01 CB-37FH Horizontal DIN Rail Mount 5 - 10 $ 59
778672-01 CB-37FV Vertical DIN Rail Mount 5 - 10 $ 109
779353-01 CB-37F-LP 5 - 10 $ 39
779491-01 CB-37F-HVD 5 - 10 $ 169
Step 4: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Name NI 9425
Product Family Industrial I/O
Form Factor CompactDAQ , CompactRIO
Operating System/Target Windows , Real-Time
Measurement Type Digital
Isolation Type Ch-Earth Ground Isolation
RoHS Compliant Yes
Analog Input
Channels 0 , 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0
Input-Only Channels 32
Output-Only Channels 0
Number of Channels 0 , 32 , 0
Timing Software
Max Clock Rate 140 kHz
Logic Levels 12 V , 24 V
Input Current Flow Sinking
Supports Handshaking I/O? No
Supports Pattern I/O? Yes
Maximum Input Range 0 V , 24 V
Counter/Timers
Counters 0
Physical Specifications
Length 9 cm
Width 2.3 cm
I/O Connector 37-pin D-Sub
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 70 °C
Minimum Storage Temperature -40 °C
Maximum Storage Temperature 85 °C

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »