- 4 simultaneously sampled analog inputs at 4 MS/s per channel with 16 bits of resolution
- Analog and digital triggering
- PXI Express interface for fast, dedicated bandwidth
- Two 16-bit analog outputs at 4 MS/s single channel, 2.5 MS/s both channels
- 24 digital I/O lines; two 32-bit counters
- NI-DAQmx driver software and LabVIEW SignalExpress interactive data-logging software
 Data Sheet |
Configure System 
View Diagram 
Select one of the following options for product configuration and pricing:
Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information
The NI PXIe-6124 S Series multifunction data acquisition (DAQ) module offers simultaneous sampling at 4 MS/s per channel, 16 bits of resolution, and a PXI Express interface for dedicated bandwidth from module to controller. The module features high speed and resolution that suit a variety of applications such as:
- Highly transient signal acquisition
- Ballistics and impact testing
- High-energy physics
- Ultrasonic and sonar testing
Application Software
With NI LabVIEW software, you can create custom data acquisition applications with the ease of graphical programming and power of more than 500 analysis functions and advanced programming tools. Every copy of LabVIEW also includes LabVIEW SignalExpress interactive data-logging software.
NI-DAQmx Driver Software
NI-DAQmx driver software goes far beyond a basic data acquisition driver to deliver increased productivity and performance in data acquisition and control application development. NI-DAQmx controls every aspect of your data acquisition system, from configuration, to programming, to low-level operating system and device control. Quickly gather real-world data with measurement-ready virtual channels and the DAQ Assistant. Build your applications with measurement-specific VIs, functions, and data types. Reliably make your measurements faster with optimized DMA data transfer and single-point I/O.
The NI PXIe-6124 is RoHS compliant. For certification information on NI hardware, visit ni.com/certification.
For additional information, visit the Resources tab.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
| General | |
|---|
| Form Factor | PXI Express |
|---|
| OS Support | Windows, Real-Time |
|---|
| Measurement Type | Voltage |
|---|
| DAQ Product Family | S Series |
|---|
| LabVIEW RT Support | Yes |
|---|
| Analog Input | |
|---|
| Number of Channels | 4 SE/4 DI |
|---|
| Sample Rate | 4 MS/s/ch |
|---|
| Resolution | 16 bits |
|---|
| Simultaneous Sampling | Yes |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 3147 µV |
|---|
| Range Sensitivity | 116 µV |
|---|
| Minimum Voltage Range | -1..1 V |
|---|
| Range Accuracy | 393 µV |
|---|
| Range Sensitivity | 23 µV |
|---|
| Number of Ranges | 4 |
|---|
| On-Board Memory | 16382 samples |
|---|
| Analog Output | |
|---|
| Number of Channels | 2 |
|---|
| Update Rate | 4 MS/s |
|---|
| Resolution | 16 bits |
|---|
| Maximum Voltage Range | -10..10 V |
|---|
| Range Accuracy | 5360 µV |
|---|
| Range Sensitivity | 305 µV |
|---|
| Current Drive (Channel/Total) | 5 mA |
|---|
| Digital I/O | |
|---|
| Number of Channels | 24 DIO |
|---|
| Timing | Hardware |
|---|
| Maximum Clock Rate | 10 MHz |
|---|
| Logic Levels | TTL |
|---|
| Maximum Input Range | 0..5 V |
|---|
| Maximum Output Range | 0..5 V |
|---|
| Input Current Flow | Sinking, Sourcing |
|---|
| Programmable Input Filters | Yes |
|---|
| Output Current Flow | Sinking, Sourcing |
|---|
| Current Drive (Channel/Total) | 24 mA/448 mA |
|---|
| Watchdog Timer | No |
|---|
| Supports Programmable Power-Up States? | Yes |
|---|
| Supports Handshaking I/O? | No |
|---|
| Supports Pattern I/O? | Yes |
|---|
| Counter/Timers | |
|---|
| Number of Counter/Timers | 2 |
|---|
| Resolution | 32 bits |
|---|
| Maximum Source Frequency | 80 MHz |
|---|
| Minimum Input Pulse Width | 12.5 ns |
|---|
| Logic Levels | TTL |
|---|
| Maximum Range | 0..5 V |
|---|
| Timebase Stability | 50 ppm |
|---|
| GPS Synchronization | No |
|---|
| Pulse Generation | Yes |
|---|
| Buffered Operations | Yes |
|---|
| Debouncing/Glitch Removal | Yes |
|---|
| Number of DMA Channels | 6 |
|---|
| Timing/Triggering/Synchronization | |
|---|
| Synchronization Bus (RTSI) | Yes |
|---|
| Triggering | Analog, Digital |
|---|
| Physical Specifications | |
|---|
| Length | 16 cm |
|---|
| Width | 10 cm |
|---|
| I/O Connector | 68-pin VHDCI female |
|---|
System Assurance Programs
Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:
- Installation and integration test of all individual hardware
- Courtesy installation of system driver sets and application development environments
- Three-year warranty and calibration coverage
- Custom documentation plus a custom restore and startup utility
This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
For more information about your warranty options:
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
Technical Support
ni.com/support
|
