Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 9472

8-Channel 24 V Logic, 100 µs, Sourcing Digital Output Module

Configure Page for: Print PDF Rich Text
  • 8-channel, 100 µs digital output
  • D-Sub or screw-terminal connector options
  • 6 to 30 V range, sourcing digital output
  • -40 to 70 °C operating range
  • Hot-swappable operation
  • Extreme industrial certifications/ratings
Compare to similar products
Configure Complete CompactRIO or CompactDAQ System
Data Sheet

The National Instruments NI 9472 is an 8-channel, 100 µs sourcing digital output module for any NI CompactDAQ or CompactRIO chassis. Each channel is compatible with 6 to 30 V signals and features 2,300 Vrms of transient overvoltage protection between the output channels and the backplane. Each channel also has an LED that indicates the state of that channel. With the NI 9472, you can connect directly to a variety of industrial devices such as motors, actuators, and relays.

There are two connector options for the NI 9472 - a 10-position screw-terminal connector and a 25-position D-Sub connector. This industry-standard 25-position D-Sub connector provides for low-cost cabling to a wide variety of accessories available from NI or other vendors. A number of vendors with custom D-Sub cable fabrication services can deliver cables with a pinout that matches your exact application needs.

NI recommends the NI 9932 strain relief connector accessory for the NI 9472 when using screw-terminal connectivity and the NI 9934 accessory for 25-position D-Sub connectivity.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete CompactDAQ/CompactRIO System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
779004-01 NI 9472 1 - 2 $ 99

Each NI 9472 requires: 1 Connectivity Accessory

NI 9472 Connectivity Accessory
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779017-01 NI 9932 Backshell with 10-pos connector block (qty 1)
NI Recommended		 1 - 2 $ 29
Step 3: Select Optional Accessories
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Connectivity Accessories
779105-01 NI 9936 - 10 screw-terminal plugs for any 10-position screw-terminal module 1 - 2 $ 49
Step 4: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Name NI 9472
Product Family Industrial I/O
Form Factor CompactDAQ , CompactRIO
Operating System/Target Real-Time , Windows
Measurement Type Digital
Isolation Type Ch-Earth Ground Isolation
RoHS Compliant Yes
Analog Input
Channels 0 , 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0
Input-Only Cannels 0
Output-Only Channels 8
Number of Channels 0 , 0 , 8
Timing Hardware
Max Clock Rate 10 KHz
Logic Levels Other
Output Current Flow Sourcing
Current Drive Single 750 mA
Current Drive All 6 A
Supports Handshaking I/O? Yes
Supports Pattern I/O? Yes
Maximum Output Range 30.0 , 6.0 V
Counter/Timers
Counters 0
Physical Specifications
Length 9.0 cm
Width 2.300 cm
I/O Connector Screw terminals
Minimum Operating Temperature -40.0 °C
Maximum Operating Temperature 70.0 °C
Minimum Storage Temperature -40.0 °C
Maximum Storage Temperature 85.0 °C

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »