Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI 9411

6-Channel, 500 ns, ±5 to 24 V Digital Input Module

Configure Page for: Print PDF Rich Text
  • 6-channel, 500 ns digital input
  • ±5 to 24 V, differential/single-ended digital input
  • -40 to 70 °C operating range
  • Extreme industrial certifications/ratings
  • Hot-swappable operation
Compare to similar products
Configure Complete CompactRIO or CompactDAQ System
Data Sheet

The National Instruments 9411 is a C Series module designed for 6-channel, 500 ns differential/single-ended digital inputs. Each channel is compatible with ±5 to 24 V signals. The NI 9411 works with industrial logic levels and signals for direct connection to a wide array of industrial switches, transducers, and devices. It requires a 15-pin D-Sub cable or connector kit. NI recommends the NI 9935 15-pin connector kit with strain relief for use with the NI 9411.

The NI 9411 is a correlated digital module, so it can perform correlated measurements, triggering, and synchronization when installed in an NI CompactDAQ chassis.

Data Sheet | View Pricing and Purchasing Information »

View Diagram

Select one of the following options for product configuration and pricing:

Select Module and Accessories Below » Configure and Price a Complete CompactDAQ/CompactRIO System »
 
Module Accessories   Chassis, Controllers, Modules Software & Services
Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
779005-01 NI 9411 1 - 2 $ 209

Each NI 9411 requires: 1 Connectivity Accessory

NI 9411 Connectivity Accessory
Step 2: Select Connectivity Accessory
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Screw Terminals
779016-01 NI 9935 15pin D-Sub connector kit
NI Recommended		 1 - 2 $ 69
779749-01 NI 9948 -Strain Relief Kit Call $ 29
Step 3: Add to Cart or Get a Quote

Guarantee your price for 30 days with an NI Instant Quote (learn more)

You have selected United States as the country where you will use the product(s) (change).

Specifications Documents


Specifications Summary

General
Product Name NI 9411
Product Family Industrial I/O
Form Factor CompactDAQ , CompactRIO
Operating System/Target Windows , Real-Time
Measurement Type Digital
Isolation Type Ch-Earth Ground Isolation
RoHS Compliant Yes
Analog Input
Channels 0 , 0
Single-Ended Channels 0
Differential Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 0
Input-Only Cannels 6
Output-Only Channels 0
Number of Channels 0 , 6 , 0
Timing Hardware
Max Clock Rate 2 MHz
Logic Levels 2.5 V
Supports Handshaking I/O? Yes
Supports Pattern I/O? Yes
Maximum Input Range 24.0 , 0.0 V
Counter/Timers
Counters 0
Physical Specifications
Length 9.0 cm
Width 2.300 cm
I/O Connector 15-pin D-Sub
Minimum Operating Temperature -40.0 °C
Maximum Operating Temperature 70.0 °C
Minimum Storage Temperature -40.0 °C
Maximum Storage Temperature 85.0 °C

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »