NI 9237 ±25 mV/V, Bridge Analog Input, 50 kS/s/ch, 4 Ch Module

Starting at $ 1,239 (view pricing options)
The NI 9237 simultaneous bridge module for use with NI CompactDAQ and CompactRIO contains all the signal conditioning required to power and measure up to four bridge-based sensors simultaneously. The four RJ50 jacks provide direct connectivity to most torque or load cells and offer custom cable solutions with minimal tools. The high sampling rate and bandwidth of the NI 9237 offer a high-quality, high-speed strain or load measurement system with zero interchannel phase delay. With 60 VDC isolation and 1,000 Vrms transient isolation, the NI 9237 has high-common-mode noise rejection and increased safety for both the operator and test system.

The NI 9237 can perform offset/null as well as shunt calibration and remote sense, making the module the best choice for strain and bridge measurements.

The NI 9944 and NI 9945 are accessories for use with quarter-bridge sensors. These accessories have a female RJ50 connector on one end and screw terminals on the other end.

Recommended Accessories
-NI 9949 RJ50 to screw-terminal adapter (for RJ50 variant)
-RJ50 cable for NI 9944, NI 9945, and NI 9949; 2 m (for RJ50 variant)
-CB-37F-LP unshielded, I/O connector block with 37-pin D-SUB (for D-SUB variant)

Box Contents
-1 NI 9237 C Series module
-1 NI 9237 Operating Instructions and Specifications manual

Specifications Documents

  • View Data Sheet

Specifications Summary


To use the NI 9237 , you need all items in the diagram below. Select Option 1 if you already own a C Series System, or Option 2 if you do not already own a chassis, controller, or software.

Roll over the icons below to learn why you need each item in the system

C Series System

1 Adapter

1 Cable

NI 9237




NI 9237 and Accessories Only
NI 9237
- 779521-01 Qty $ 1,349 each
- 780264-01 Qty $ 1,239 each
- 780264-02 Qty $ 1,416 each
Required Accessories
Qty $ 192 each
Qty $ 31 each
Change Accessories

Learn about all compatible accessories and get recommendations based on your application needs.

Optional Accessories
Compliant Calibration
Qty $ 290 each
Load Cells
Honeywell 123 S-Type Tension Load Cell - 783223-01
Qty $ 538 each
Honeywell 125 S-Type Tension Load Cell - 783226-01
Qty $ 486 each
Honeywell 41 Low Profile Load Cell - 783206-01
Qty $ 1,161 each
Honeywell 31 Miniature Load Cell - 783211-01
Qty $ 949 each
Honeywell 13 Subminiature Compression Load Cell - 783216-01
Qty $ 795 each
Pressure Transducers
Honeywell TJE Pressure Sensor - 783236-01
Qty $ 910 each
Honeywell A-105 Flush Diaphragm Pressure Sensor - 783247-01
Qty $ 763 each
Honeywell S, Subminiature Flush Diaphragm Pressure Sensor - 783241-01
Qty $ 755 each
Cable For Honeywell 41 Load Cell and Pressure Transducers
Honeywell PT06A-10-6S to RJ50 Cable (3 ft) - 783252-01
Select length:
Qty $ 118 each

Subtotal: $ 1,572

Add to Cart
Guarantee your price for 30 days (learn more) Request Quote

Select a Platform and Configure a System

Create a complete system with the NI 9237 and its accessories. However, the NI 9237 is compatible with multiple C Series Platforms, NI CompactDAQ and CompactRIO. Please review the comparison information below and select a platform to begin configuring your system.

Configure System Configure System

NI CompactDAQ NI CompactRIO
Mixed-Measurement Data Acquisition

Learn more

Time-Critical Control & Monitoring

Learn more

Features NI CompactDAQ NI CompactRIO
USB, Wi-Fi, Ethernet, Headless Operation Ethernet, Headless Operation
Up to -40 to 70 C Up to 50 g shock and 5 grms operational vibration Up to -40 to 70 C Up to 50 g shock and 5 grms operational vibration
LabVIEW, LabVIEW Real-Time, C, C++, VB.NET, C#.NET LabVIEW, LabVIEW Real-Time, LabVIEW FPGA, C, C++
NI-DAQmx driver; configuration and troubleshooting tools; short time to first measurement NI-RIO driver; flexibility and customizabilty
PC-based data acquisition; embedded data-logging; portable and benchtop Single-point acquisition; closed-loop control; deterministic operation

Service Programs for Hardware

At NI, we produce high-performance hardware and are committed to helping you maintain that performance for years to come. Our three- or five-year service programs for hardware and systems provide the coverage you need while ensuring lowest total cost of ownership over the life of your system:

  • Get up and running faster with system assembly and configuration services
  • Operate on a fixed budget with prepaid repair and calibration services
  • Maintain peak performance with a discounted calibration plan
  • Simply call us to schedule your service—no budget approval needed

To learn more about service programs for hardware and systems, see

Technical Support

With the knowledge, experience, and responsiveness of NI applications engineers in more than 30 languages and 40 countries, we have the technical support resources to ensure your success. Through our standard NI technical support program, we can help you:

  • Consult on how to use NI products
  • Overcome development challenges
  • Quickly resolve issues pre- or post-deployment

To access NI technical support services for your hardware, visit

Training and Certification

With extensive training options for new and experienced users, we can help you reduce development time and costs through faster learning and increased productivity with your NI hardware and systems. Gain the skills you need to design and develop high-quality applications:

  • Learn recommended techniques to reduce development time and improve application performance and scalability
  • Leverage more than 40 training courses taught by NI and industry experts
  • Attend training in a variety of formats, including online, virtual, and classroom settings

To find training courses for your hardware, visit

Consulting and Integration

NI and the extensive network of NI Alliance Partners provide a wide range of professional services so that together, we can assist you with the design, development, and deployment of even the most complex systems. Take advantage of the team’s in-depth knowledge of NI products and applications with the following services:

  • Prototyping and feasibility analysis
  • Startup, consulting, and development assistance
  • System integration
  • Migration and upgrade assistance

For more information on NI professional services and the Alliance Partner Network, see