The NI ENET-9219 Ethernet data acquisition (DAQ) device includes four simultaneously sampled universal measurement channels for multipurpose testing. With the ENET-9219, you can measure several signals from sensors such as strain gages, RTDs, thermocouples, load cells, and other powered sensors. The channels are individually selectable, so you can perform a different measurement type on each of the four channels. Measurement ranges differ for each type of measurement and include up to ±60 V for voltage and ±25 mA for current. You can synchronize an ENET-9219 with other devices by using two onboard individually programmable digital trigger lines to export or import sample clocks, start triggers, pause triggers, and reference triggers. Refer to the manual for detailed specifications.
With 250 Vrms of channel-to-channel isolation, the ENET-9219 protects both your measurement system and other channels within the same module from harmful voltage spikes. In addition to this increased safety, channel-to-channel isolation eliminates problems associated with ground loops and rejects high common-mode voltages for more accurate measurements.
NI Ethernet Data Acquisition
NI Ethernet DAQ devices combine industry-standard Ethernet communication; direct sensor connectivity; and the flexibility of NI LabVIEW software for remote monitoring of electrical, physical, mechanical, and acoustical signals. With built-in signal conditioning and reliable network communication, NI Ethernet DAQ devices stream data in real time for easy-to-use, high-performance remote measurements.
NI-DAQmx Measurement Services Software
NI-DAQmx driver and measurement services software provides easy-to-use configuration and programming interfaces with features such as the DAQ Assistant and automatic code generation to help reduce development time. Every NI Ethernet DAQ device also includes a copy of LabVIEW SignalExpress LE software so you can quickly acquire, analyze, and present data without programming.
Application Software
In addition to LabVIEW SignalExpress, NI Ethernet DAQ devices are compatible with the following versions (or later) of NI application software: LabVIEW 7.1¹, LabWindows™/CVI 7.x, and Measurement Studio 7.x. NI Ethernet DAQ devices are also compatible with ANSI C/C++, C#, Visual Basic .NET, and Visual Basic 6.0.
¹ NI-DAQmx 8.8 (and later) provides support for NI LabVIEW 7.1, 8.2, 8.5, 8.6, and later.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:
Significant cost savings compared to individual repair incidents
Fault location, diagnostics, and repair by NI any time the system product fails
All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.
Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.
NI now has over 50 C Series modules for your NI CompactDAQ, CompactRIO, or single module carrier. Several of these modules are also supported by other platforms including USB, Ethernet, or Wi-Fi (802.11). See what new measurements you can add to your existing system using the Compatibility Chart and watching the video below.
