- Use widespread IEEE 802.11 (Wi-Fi) or Ethernet network infrastructure for remote measurements
- Stream data on each channel at more than 50 kS/s with 24 bits of resolution
- Simplify remote monitoring with LabVIEW and direct sensor connectivity
- Protect data with 128-bit AES encryption, the highest commercially available standard
- Seamlessly integrate wireless measurements into existing systems
- Save setup and development time with NI-DAQmx measurement services software
NI Wi-Fi data acquisition (DAQ) devices combine IEEE 802.11 wireless or Ethernet communication; direct sensor connectivity; and the flexibility of NI LabVIEW software for remote monitoring of electrical, physical, mechanical, and acoustical signals. NI Wi-Fi DAQ devices can stream data on each channel at more than 50 kS/s with 24 bits of resolution. In addition, built-in NIST-approved 128-bit AES encryption and advanced network authentication methods offer the highest commercially available network security. With the flexibility of LabVIEW graphical programming and the ubiquity of 802.11 network infrastructure, Wi-Fi DAQ makes it easy to incorporate wireless connectivity into new or existing PC-based measurement or control systems.
NI also introduces two new carriers based on Wi-Fi and Ethernet DAQ for NI C Series measurement and control modules. The NI WLS-9163 is a single module C Series carrier providing both 802.11b/g and Ethernet connectivity back to a host PC, while the NI ENET-9163 is a single module carrier with only Ethernet connectivity. C Series modules provide direct sensor connections and built-in signal conditioning for a variety of measurements, including temperature, strain, acceleration, current, and voltage. You can use them interchangeably for a variety of measurement and control applications across several platforms, including NI CompactDAQ and CompactRIO, and an NI single module USB carrier. You may purchase WLS-9163 carriers and C Series modules separately or together as NI WLS-9xxx devices:
WLS-9211 (4-channel, 14 S/s, 24-bit, ±80 mV thermocouple input)
WLS-9215 (4-channel, 100 kS/s/ch, 16-bit, ±10 V analog input)
WLS-9219 (4-channel, 100 S/s/ch, 24-bit, ±60 V, ±25 mA universal input)
WLS-9234 (4-channel, 51.2 kS/s/ch, 24-bit, ±5 V IEPE input)
WLS-9237 (4-channel, 50 kS/s/ch, 24-bit, ±25 mV/V bridge and strain input)
For more information, see the individual device model pages or the additional Wi-Fi DAQ resources below.
|
