NI 94758-Channel, 60 V, 1 µs Sourcing Digital Output Module |
The NI 9475 is an 8-channel, 1 µs sourcing digital output C Series module that you can use to connect directly to a variety of industrial devices such as solenoids, motors, actuators, relays, and lamps. Each channel sources up to 1 A at levels up to 60 VDC and features 1000 Vrms withstand isolation from channel to earth ground. The NI 9475 uses an industry-standard 25-pin D-Sub connector for low-cost cabling to a wide variety of 25-pin accessories from National Instruments and other vendors. The NI 9475 requires a 25-pin D-sub connector or cable such as the NI 9934 accessory kit for direct connectivity. The NI 9934 includes a screw-terminal connector with strain relief as well as a D-Sub solder-cup backshell for creating custom cable assemblies.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Related InformationSpecifications Summary
Module Options For Your NI System NI now has over 50 C Series modules for your NI CompactDAQ, CompactRIO, or single module carrier. Several of these modules are also supported by other platforms including USB, Ethernet, or Wi-Fi (802.11). See what new measurements you can add to your existing system using the Compatibility Chart and watching the video below. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||






