Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PCIe-6535

10 MHz Digital I/O for PCI Express

Configure Page for: Print PDF Rich Text
  • Not recommended for new designs.
  • 10 MHz maximum clock rate
  • 40 MB/s maximum throughput
  • Selectable voltage levels of 2.5 and 3.3 V (5 V compatible)
  • 32 channels with per-channel directional control
  • Synchronous and asynchronous timing modes
View Data Sheet


Not recommended for new designs. NI recommends using the NI PCIe-6535B instead.

The NI PCIe-6535 is a high-speed digital I/O board capable of continuously streaming data up to 40 MB/s over the PCI Express bus.

It features clock rates up to 10 MHz from internal or external sources, selectable voltage levels of 2.5 and 3.3 V (5 V compatible), and per-channel directional control of 32 digital lines. The NI PCIe-6535, based on NI-DAQmx driver software, is compatible with the NI Digital Waveform Editor, so you can interactively create, edit, and import digital waveforms.

The low-cost, high-throughput architecture of the NI PCIe-6535 makes it an ideal solution for interfacing and testing image sensors or display panels. The board is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing.

View Data Sheet | View Pricing and Purchasing Information »

Specifications Documents

View Data Sheet

Specifications Summary

General
Product Family High-Speed Digital I/O
Form Factor PCI Express
Part Number 780694-01
Operating System/Target Windows
Triggering Digital
Synchronization Bus (RTSI) Yes
External Clocking Yes
Length 18.1 cm
Width 12.6 cm
Height 2 cm
I/O Connector 68-pin VHDCI female
Product Name PCIe-6535
Analog Input
Channels 0
Analog Output
Channels 0
Digital I/O
Bidirectional Channels 32
Timing Hardware
Maximum Clock Rate 10 MHz
Maximum Data Rate / Channel 10 Mbits/s
Logic Levels 2.5 V , 3.3 V
Differential Logic No
Watchdog Timer No
Supports Handshaking I/O? Yes
Supports Pattern I/O? Yes
Digital Interface Parallel
Logic State Control Software Controlled
Supports Hardware Data Compare? No
Supports Linking/Looping Segments? No
Supports Data Delay? No
Offers Dedicated Bandwidth? Yes

NI PCIe-6535 Complete Package

Each NI PCIe-6535 requires:
1 Connector Block 1 Cable NI PCIe-6535 Software

Roll over icons above to learn why you need each item in the package.

NI PCIe-6535 and Accessories

Hardware Subtotal: $ 1,728
NI PCIe-6535 - 780694-01 Qty $ 1,175 each
Required Accessories
Connector Block -
CB-2162 - 778592-01
Qty $ 341 each
Cable - Unshielded
Qty $ 212 each
Change Accessories
Learn about all compatible accessories and get recommendations based on your application needs.
 
Optional Accessories Show
Estimated Shipping Days: 10 - 15
Package Price: $ 1,728
Add to Cart >>
Guarantee your price for 30 days (learn more) Instant Quote
Save for Later
Since your device does not have direct signal connectivity, you need a connector block to act as an interface between your sensors/signals and your device. A connector block provides easy access to the inputs and outputs of your hardware.
You need a cable to transmit signals between your device and your signal connections on your connector block.
You need software to interface with your hardware and to collect, analyze, present, and store your measurements. This board is compatible with a variety of programming languages, including LabVIEW, C/C++, Visual Basic, and .NET. LabVIEW provides the easiest integration with all of your NI hardware and is recommended to maximize your hardware investment.

You have selected United States as the country where you will use the product(s) (change).

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Extended warranty and calibration coverage for up to five years
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »