Academic Company Events NI Developer Zone Support Solutions Products & Services Contact NI MyNI

NI PXIe-5663

6.6 GHz Vector Signal Analyzer

Configure Page for: Print PDF Rich Text
  • 10 MHz to 6.6 GHz frequency range
  • 50 MHz instantaneous bandwidth (3 dB)
  • ±0.35 dB typical flatness within 20 MHz bandwidth
  • ±0.65 dB typical amplitude accuracy
  • <-158 dBm/Hz typical noise floor at 1 GHz
  • 80 dB typical spurious-free dynamic range (SFDR)
  • Data Sheet

Step 1: Verify Device and Quantity Selection
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
  NI PXIe-5663      
780415-02 256 MB
NI Recommended		 -- For price, select country  
780415-01 64 MB -- For price, select country  

Each NI PXIe-5663/256MB (3-slot) requires:

NI PXIe-5663/256MB (3-slot)
Step 2: Select Cable
Part
Number		 Description Est Ship Days Glossary Definition US Dollars
(change) 		Qty
Shielded
780566-01 NI PXIe-5663 Cable Accessory Kit -- For price, select country  
780540-01 Reference Clock T Connector -- For price, select country  
Step 3: Add to Cart or Get a Quote

Please select the country where you will use the product(s) so that we can provide you with accurate pricing, availability, and purchasing information

The NI PXIe-5663 6.6 GHz RF vector signal analyzer with wide instantaneous bandwidth is optimized for automated test. Combined with high-performance PXI controllers and the high-speed PCI Express data bus, this vector signal analyzer can perform common automated measurements significantly faster than traditional instrumentation.

Data Sheet | View Pricing and Purchasing Information »

Specifications Documents


Specifications Summary

General 
Form FactorPXI Express
OS SupportWindows
LabVIEW RT SupportYes
Analog Input 
Number of Channels1 SE
Bandwidth50 MHz
Frequency Range10 MHz..6.6 GHz
Resolution16 bits
Maximum On-Board Memory 256 MB
Input Impedance50 Ohm
Provides Digital Down Conversion?Yes
Noise Floor (@ -50 dBm output)-159 dBm/Hz
Phase Noise (@ 10 kHz offset)-105 dBc/Hz
Analog Output 
Number of Channels0
Digital I/O 
Number of Channels0
Timing/Triggering/Synchronization 
Synchronization Bus (RTSI)Yes
T-clock CapabilityNo
TriggeringAnalog, Digital
External ClockingYes
Physical Specifications 
Length21.6 cm
Width6.0 cm
Height13.0 cm
I/O ConnectorSMA female

View Pricing and Purchasing Information »

System Assurance Programs

Reduce your setup time and total cost of ownership, and get a system you can use out of the box with National Instruments system assurance programs. System assurance programs include:

  • Installation and integration test of all individual hardware
  • Courtesy installation of system driver sets and application development environments
  • Three-year warranty and calibration coverage
  • Custom documentation plus a custom restore and startup utility

This service is only available for PXI, NI CompactRIO, and NI Compact FieldPoint systems.

Extended Warranties

National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits:

  • Significant cost savings compared to individual repair incidents
  • Fault location, diagnostics, and repair by NI any time the system product fails
  • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing specifications

For more information about your warranty options:

Calibration

NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. NI provides manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many NI measurement products.

Training

NI training is the fastest, most certain route to productivity with NI tools and successful application development.

Repair Services

Return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to restore the hardware to manufacturing specifications.

Technical Support

ni.com/support

View Pricing and Purchasing Information »

Back to top »