NI 92253-Channel, 300 Vrms Analog Input Module |
The NI 9225 C Series analog input module has a full measurement range of 300 Vrms for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed simultaneous sampling at 50 kS/s per channel. In addition, you can prevent ground loops and add safety to a system with 600 Vrms channel-to-channel isolation between the three NI 9225 channels. For high-voltage applications, or for added signal wire strain relief, try the NI 9971 backshell kit. The NI 9971, sold separately, contains four backshells. Replacement or spare connectors are sold separately in the NI 9976 kit, which contains 10 of the 2-position screw terminals used on the NI 9225.
View Diagram
Select one of the following options for product configuration and pricing:
You have selected United States as the country where you will use the product(s) (change). Additional Product Information
Specifications Summary
What is Conformal Coating? Conformal coatings are specially formulated thin film materials that are applied directly to circuit boards or circuit card assemblies (CCAs). These films provide environmental protection for components and circuitry. The thin film materials used for conformal coating are normally applied using a process of dipping or spraying the CCA with a liquid or resinous material. As the material dries, it forms a resilient coating that can protect against moisture, mold, dust, corrosion and other environmental stresses.Interested in Conformal Coating options with this module? Click one of the options below: |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
