- 20 to 32 bidirectional data channels per module (up to 544 channels per system)
- Memory option: 8 Mb/channel onboard memory (32 MB total)
- 100 MHz maximum timing and state clock rate (10 ns)
- Shielded single-ended flying-lead cable and IC grabber clips included for direct connectivity
- NI Digital Waveform Editor included for editing and creating waveforms
- NI LabVIEW SignalExpress interactive software for quickly acquiring, generating, and storing data
 Data Sheet | Specifications
(2)
NI logic analyzer and digital pattern generator bundles help you meet your analysis and generation needs for designing, testing, and debugging digital ICs and electronics. The bundles combine NI LabVIEW SignalExpress, interactive software that aids in building programming-free applications, with NI 6542 or NI 6552 100 MHz digital waveform generator/analyzers.
You can choose from two different bundles that are available for both PCI and PXI. The NI 6542 bundles, which provide 32 channels compatible with 5.0, 3.3, 2.5, and 1.8 V logic, are designed to drive inputs or acquire outputs from a circuit or system. If you need flexible voltage levels (-2.0 to 5.5 V in 10 mV steps), per-cycle control over the direction of a line for stimulus-response applications, and the ability to passively probe a circuit with low loading, use the NI 6552 bundles. A high-quality flying-lead cable provides a 50 Ώ signal and ground connection all the way to your device under test. Each signal and ground pair connects to standard 0.1 in. headers and the included grabber clips.
At a discount, these bundles provide flexible, powerful hardware and software features ideal for design and test engineers searching for a low-profile instrument for complex pattern generation, timing and state behavior analysis, and report generation.
Additional Product Information
Related Information
Specifications Documents
Specifications Summary
Factory Installation
Reduce your setup time with National Instruments installation services and get a system you can use out of the box. Factory installation services include:
- Installation of all individual hardware and software components as well as full testing to eliminate conflicts
- Custom documentation plus a custom restore and startup utility
- 2-year warranty and calibration coverage
This service is only available for PXI, CompactRIO, and Compact FieldPoint systems.
Extended Warranties
National Instruments designs and manufactures all products to minimize failures, but we know unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase covering any repair costs for up to three years.
- Significant cost savings compared to individual repair incidents
- Fault location, diagnostics, and repair by NI any time the system product fails
- All parts and labor costs covered as well as any adjustments needed to bring the hardware back to manufacturing specifications
Calibration
NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software to calibrate many of our measurement products.
Training
NI training is the fastest, most certain route to productivity with NI tools and successful application development.
Repair Services
- You can return your registered product under warranty at no additional labor and parts cost. NI offers fault location, diagnostics, and repair any time the system fails as well as any adjustments needed to bring the hardware back to manufacturing specifications.
- Contact us to obtain a Return Material Authorization (RMA) form and shipping instructions
- View your RMA support request status online
- Register your product
Technical Support
www.ni.com/support
|
